Thread: 18 inch 300 wsm

Anyone running a Tikka 18 inch suppressed 300 wsm
Interested to hear any info on load data average velocity, suitable powders for 168 amax, and what average loss of velocity per inch of barrel experienced.

Cheers

I run 20in bbl with 178gr eldm
Have had 18in and went to 20inch on this rifle, I don't see me changing it anytime soon
The 178s are going 2920fps


Sent from my iPhone using Tapatalk

Cheers Smiddy,

Was there much difference in performance between the 18 and the 20?

Originally Posted by Sako85

Cheers Smiddy,

Was there much difference in performance between the 18 and the 20?

With the 18in I ran 150s at I think 3100fps or there abouts.
The load in the 20in is deff better, but never tested the heavier proj in the 18in.

At 20in + suppressor it is still handy as in the bush


Sent from my iPhone using Tapatalk

Is an 18" 300WSM any more powerful than an 18" .308 ?

Originally Posted by Bagheera

Is an 18" 300WSM any more powerful than an 18" .308 ?

Originally Posted by Smiddy

I run 20in bbl with 178gr eldm
Have had 18in and went to 20inch on this rifle, I don't see me changing it anytime soon
The 178s are going 2920fps


Sent from my iPhone using Tapatalk

Based on that I’d say a heap of difference...

I’m running a 20 inch barrel with a ssrnz can with 178gr eld-x at 2950
Still short enough for bush gun and shot deer out to 650 yards no problems.Good all purpose rig

I'm talking about 18" when 10% of your powder might be blasting out the end of your barrel before its burnt.
Can the 308 burn all of its powder inside 18" ?

ADI catalogue 2010
308win 24" 175gr AR2208 Max 45.0gr 2690fps
300WSM 24" 175gr AR2209 Max 65.0gr 3010fps
So, very true, the WSM starts with almost 50% more powder but could someone with quickload estimate how much can be burnt in an 18" barrel ?

Originally Posted by Bagheera

I'm talking about 18" when 10% of your powder might be blasting out the end of your barrel before its burnt.
Can the 308 burn all of its powder inside 18" ?

ADI catalogue 2010
308win 24" 175gr AR2208 Max 45.0gr 2690fps
300WSM 24" 175gr AR2209 Max 65.0gr 3010fps
So, very true, the WSM starts with almost 50% more powder but could someone with quickload estimate how much can be burnt in an 18" barrel ?

Quickload says:
97.8% burn in 24" tube
95.4% burn in 18"

Bagheera,, most 18 inch bangers look rather impressive when dark, with the flame flashing out off the tube.
A fare bit of shit comes out of a shorty,dont shoot over the bonnet ,it will f*** the paint lol.

Originally Posted by MGNZ

Quickload says:
97.8% burn in 24" tube
95.4% burn in 18"

Thanks MG
That looks pretty good actually.
I guess the hot gas is still accelerating the bullet over the last six inches for both cartridges.
But 95% of 65gr is still way more than 45gr.

@30calterry tagging you in mate as this thread should be good reading for you given you've just picked up a new Hells canyon (or is that cannon) in 300wsm.

P.

Originally Posted by Carpe Diem

@30calterry tagging you in mate as this thread should be good reading for you given you've just picked up a new Hells canyon (or is that cannon) in 300wsm.

P.

Thanks scrumpy


Sent from my iPhone using Tapatalk Pro

Originally Posted by Smiddy

I run 20in bbl with 178gr eldm
Have had 18in and went to 20inch on this rifle, I don't see me changing it anytime soon
The 178s are going 2920fps
Sent from my iPhone using Tapatalk

What powder u running @Smiddy ?