Does anyone have an oal length for say a 75eldm seated out to maximize case capacity?
Also what velocity are people getting?
Looking to improve on my 223 without going to a real barrel burner
Also anyone know of a reamer available?
Printable View
Does anyone have an oal length for say a 75eldm seated out to maximize case capacity?
Also what velocity are people getting?
Looking to improve on my 223 without going to a real barrel burner
Also anyone know of a reamer available?
Email terminator products.
PM inbound,terminator has one Im sure.
The good old 222 magnum surfaces again. It died then ruger used it as the basis of the 204, now with a slightly different shoulder necked back to 224 it's hot again.
Was looking for Greg's threads but seem to have gone from the commercial section.Quote:
Originally Posted by veitnamcam
Incoming pmQuote:
Originally Posted by PerazziSC3
Sent from my S60 using Tapatalk
Probably not that helpful as use lighter pills but 53 vmax at 3680 fps with BM2
Sent from my SM-G986B using Tapatalk
I've emailed greg but assume there are others on the forum that have gone down this routeQuote:
Originally Posted by BRADS
Greg built me one back in 2013 on a Tikka was an absolute demon on bunnies 700 yard kills not uncommon.Quote:
Originally Posted by PerazziSC3
Sent from my SM-G986B using Tapatalk
I'm running 75gr Hornady BTHP @ 3060 from a 22" barrel with AR2208.
And incase you didn't find Gregs thread
https://www.nzhuntingandshooting.co....rminator-5607/
I'm curious about this also...can it be done by simply rechambering an existing 223, 1 in 8 twist barrel?Quote:
Originally Posted by PerazziSC3
Yes. Mine was a factory T3 .223 1:8. Run the reamer in...job done!Quote:
Originally Posted by gqhoon
What's the oal of loaded round?Quote:
Originally Posted by NZShoota
@Dreamer might still have some brass spare?
That does sound very appealing!!Quote:
Originally Posted by NZShoota
WTB - Tikka T3 223 with 1 in 8 twist.