Thread: 22-250 necks

Just bought a 700 varmint. Thinking of getting Wilson or redding bushing FL dies. Dies anybody have some loaded lupua brass that you could measure outside neck diameter?

Also does anyone have pet loads using adi powders? Haven't decided on projectiles yet but thinking 50 vmax or other explody goodies.

Cheers team!

Ive used imr4064/ ar2208 with 50 gr vmax, in a tikka varmint ,awesomely devastating on rabbits , magpies, even dropped a couple deer, great round


Sent from my iPhone using Tapatalk

35.5grs of ADI 2206h in Winchester cases, COAL length using Hornady comparator 2.033" @3650FPS using Bryns 52 gr bullet
https://sites.google.com/a/targex.co.nz/targex3/

shot very well in mine, had some Lapua cases but never got to use them before sold the rifle on.

.251 with a light neck turn to take off the high side only. Have been using the Berger 55gr flat base varmint 39gr CFE223 about 3600fps. Very dirty powder with I think graphite in it but no copper fouling. As always approach other peoples loads with caution. 1/2 moa in my Browning.

The amount of powder escapes me and everything is packed for a move, but H4895 with Sierra 55g SBT about 3640fps, has worked a treat the past 12yrs.

55 gr v- max 34 gr 2208 in Nosler cases going about 3600 fps on a hot day for mine

Sent from my GT-I8190T using Tapatalk

37.5gr AR2208 under 40gn V-max is insane in my Tikka. I'll let you work up your own seating depth for yours, but am confident I'd drop Reds with a shot in the eye at 100m


Sent from my iPhone using Tapatalk