Thread: .223 load

Originally Posted by Nakihunter

I've just bought a new Tikka T3x Superlite Aspire. Beautiful rifle that I just couldn't resist when I saw it. 1:12 inch twist . Burris 3-9X scope.

I managed to score 1.5 kg of 2219 (H322) as it was a fantastic powder in my 222 Rem.

A mate happened to have 1 kg of AR2206H that he did not need. So I have enough powder for 1500 rounds. I also scored 1100 small rifle primer as a straight swap with a mate for large rifle primers.

I got 100 Sako brass new & 200 Fiocci once fired brass.

Projectiles are not that simple as they are so bloody expensive. I got 1 packet of Hornady 55gr SP & Sierra 60 gr HP. A mate gave me about 300 projectiles of Hornady 50 gr, Sierra 60 gr SP & the old Nosler Flat base 55 gr.

I've tried 3 or 4 loads with Hornady 55gr SP & Sierra 60gr HP using AR2219 and managed a few groups of 1 to 1.5 inches with 5 shots. Chronographed 55 gr at max 3200 fps and 60 gr at 3000 fps.

Hope to do more load development when the weather clears up.

all those projectiles will do the job nicely...just pick one and work your way through them..then use up next lot (says man who takes 3 different types of round with him !!!) the 50 grn hornady...are they spsx???? if so keep speed down to 3000ish 24.5grns 2206 type level and they will be great,VERY soft pill that is really varmit material,or pick shot carefully...awesome wallaby pill so should be good,if messy,on goats or fallow.