Thread: 243 loads

Originally Posted by 257weatherby

You want the coal? What is the action?, what is your throat cut to? is it the same as @Cigar 's rifle? Some cartridge/manufacturer combinations have generic loads that work across the board, most do not, particularly with premium bullets. Start with below book max loads and use standard book coal to start unless you know your length and you have a plan/reason for jump. What jumps in one rifle could be a jam in another, add in a hard heavy jacketed bullet and........

Ok so what iv got is a Tikka T3x with a 1:10 twist , have been through the ADI website n have quiet a good idea where i need to start with the load ladders , with the COAL i am pritty much limited to the length of the magazine , i havent measured the lands yet but will do once the lockdown is over and done with , so its real interesting to talk to guys that have been ther done that , i was going to to start around the 85 gr 87gr area but seeing what some people are useing i need to be up bullet weight , so yeh real interesting talkin to guys about this , now im back to the drawing board n will try the heavier projectiles


Sent from my SM-G930F using Tapatalk