Thread: 243 loads

Originally Posted by Kelton

If its sized back down and you start a projectile just a little and chamber it and it does jam agaisnt lands wouldnt it be more likely to get stuck in barrel then push back into case?i sore a method they other day where they removed the firing pin to give no resistance on bolt what so ever and work down in 5 thou lots until theirs no tention on bolt as it starts freeing up they went down to 1 thou taking note of the coals as your working down then when it freed right up they took the last measurement called it lands and wrote that down and worked back from their with jump timly but i see gow it worked

Im thinking just size the brass so 4 - 5 mm of the neck is sized back to factory , ul get less resistance n the projectile will press in2 the case rather than the barrell , but also use a case without a primer n should take away the hassell of removing the firing pin ( BUT i am no expert n have done this only once )

Sent from my SM-G930F using Tapatalk