Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 35
Like Tree10Likes

Thread: 243 Powder an Projectiles

  1. #1
    Member thatguy's Avatar
    Join Date
    May 2019
    Location
    Land of the Auck
    Posts
    644

    243 Powder an Projectiles

    I know some of this has been covered on here half a decade ago. Starting to load for 243. AR2209 is out of stock everywhere.
    Should I start with Winchester 760 or AR2206H?
    Thinking to try Hornady SST 95gr, Speer BTSP 100gr or whatever else..seems much of a muchness at this point.

    18” barrel with suppressor
    1-10 twist
    Shooting 200m Max more like 20-100m.

    Any recommendations?

  2. #2
    Member
    Join Date
    Nov 2012
    Posts
    1,527
    Get some Hodgdon superprofrmance it works well in the .243

    Sent from my CPH1903 using Tapatalk

  3. #3
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,972
    2208 would be preferable to 2206h if you have it and even then its a bit fast, I had a nice load with 95gr targex and 2208 but dont have the data on hand sorry.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  4. #4
    Member thatguy's Avatar
    Join Date
    May 2019
    Location
    Land of the Auck
    Posts
    644
    Quote Originally Posted by 25 /08 IMP View Post
    Get some Hodgdon superprofrmance it works well in the .243

    Sent from my CPH1903 using Tapatalk
    I can only see load data for up to 80gr. Also will need to see if there’s stock locally.

  5. #5
    Member thatguy's Avatar
    Join Date
    May 2019
    Location
    Land of the Auck
    Posts
    644
    Quote Originally Posted by veitnamcam View Post
    2208 would be preferable to 2206h if you have it and even then its a bit fast, I had a nice load with 95gr targex and 2208 but dont have the data on hand sorry.
    I think 2208 is out of stock too...

  6. #6
    Banned
    Join Date
    Jan 2021
    Location
    auckland
    Posts
    950
    I use w760 and it works good. (6 creed)Superformance be a notch up in speed. Just start a bit lower than the 80gr data.
    Staball6.5 be another good one. Never used it myself. I just use belmont 760 wherever I can. Just went up in price from $40 to a whopping ,$50 per can
    Last edited by Pushover; 08-03-2021 at 02:19 PM.
    Russian 22. likes this.

  7. #7
    sneakywaza I got
    Join Date
    May 2013
    Location
    Fairlie
    Posts
    3,588
    Quote Originally Posted by thatguy View Post
    I know some of this has been covered on here half a decade ago. Starting to load for 243. AR2209 is out of stock everywhere.
    Should I start with Winchester 760 or AR2206H?
    Thinking to try Hornady SST 95gr, Speer BTSP 100gr or whatever else..seems much of a muchness at this point.

    18” barrel with suppressor
    1-10 twist
    Shooting 200m Max more like 20-100m.

    Any recommendations?
    18" is unfortunate, but it is what it is.... am running 2206H behind 85gn Sierra Sp and 87gn Vmax for excellent velocities - running 2209 and or Re22 behind 95gn Berger and 95gn SST. Re22 gives up a comfortable 3050fps at 3/4" out of 20". I think you might have to do a deal on the forum to get powder unless you run sub 90gn loads on 2206H. 85gn Sierra Sp kills deer and small pigs just fine as does their 85gn Hp. 87gn Berger and 87gn Hornady Hp kills Bill, opps I meant bigger deer, just fine too. No need to run heavy for cartridge, 90gn Hot cor or 90 Swift for tough bullets that deliver on closer shots on bigger tougher animals if inside 100 a lot.
    Pushover likes this.

  8. #8
    Banned
    Join Date
    Jan 2021
    Location
    auckland
    Posts
    950
    Yeah those hotcors are my favourite shortish range fast driven bullet in other cals

  9. #9
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    4,025
    2213 SC works well in 243 as well if you can get some.

  10. #10
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    3,009
    I can put you into some w760 or re 22 in akl. Pm me

  11. #11
    Member
    Join Date
    Jun 2014
    Location
    CNI
    Posts
    5,908
    H4350 is same as 2209; just relabeled by Hodgdon. Consider H414 also as its close to W760.
    Summer grass
    Of stalwart warriors splendid dreams
    the aftermath.

    Matsuo Basho.

  12. #12
    Member
    Join Date
    Jul 2017
    Location
    Whangarei
    Posts
    1,195
    purity sure H414 and W760 are the same. load data is the same. I've used that for 58-87 gr bullets in my 243. probably at its best with bullets between 70-90 gr.
    I see this new powder StaBALL 6.5 is showing a big speed advantage in some 243 loads.
    Ie 80gr bullets at 3500 and 70gr bullets at 3700fps, that's fair rocking along.
    Z

  13. #13
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    3,009
    Have told him where some w760 is so hopefully he can get it

  14. #14
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Quote Originally Posted by thatguy View Post
    I know some of this has been covered on here half a decade ago. Starting to load for 243. AR2209 is out of stock everywhere.
    Should I start with Winchester 760 or AR2206H?
    Thinking to try Hornady SST 95gr, Speer BTSP 100gr or whatever else..seems much of a muchness at this point.

    18” barrel with suppressor
    1-10 twist
    Shooting 200m Max more like 20-100m.

    Any recommendations?
    @mopheadrob Well look at this, we only just talked about powder for your 243, and a thread appears with the answers !

  15. #15
    Member mopheadrob's Avatar
    Join Date
    Jun 2018
    Location
    Christchurch
    Posts
    695
    Quote Originally Posted by Moa Hunter View Post
    Well look at this, we only just talked about powder for your 243, and a thread appears with the answers !
    Yes, I'd read it... I almost grabbed some W760 last time I was in GW but it would have meant working up yet another load (I've already got loads with 2209 & 2213sc). If I'm going to go down that track, I want to do it with whatever powder will work best in the 7WSM. Also +/- 90 grain projectiles seem to be the tipping point between recommended powders in this cartridge. I'm running the 95 grain Targex.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!