If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Some might be aware that the US military recently picked the 6.5 creedmoor, even though in tests the 260 clearly won out, the simple reason easr of manufacturing 6.5 creed ammo for the semi autos. Anyways back to the 260, been running one for about 7 or 8 years, current rifle is a badger m2013 benchmark barrel. Usually run lapua brass, ccibr2 h4350, running 44.5grains in a 27 inch barrel, 2925 velocity, when I run 140 berger hybrids around 3025. Barrel life on the last 5 or 6 barrels has on average been about 4000, less supressed, but I shot prs so shes run hard. About 2011 I ran a test with superperformance, to be honest, incredible speeds with 139 scenars but accuracy at best was 1/2 moa so I passed. I only wish at times Remington jad put as much effort into the 260 Remington as Hornady did with the creedmoor.
Ran the above load through Quickload with a 2.950" OAL
came back as 2913 FPS from a 27" barrel Max Pressure 65968 PSI, Saami spec is 60191 PSI
He must have a strong action and good brass
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks