Thread: 270 loads

yup this is exactly what I am using in my 270
145g ELDX
58 grains of ADI AR2213SC
Winchester brass
cci primers
off the top of my head speed was 2930fps or there abouts.
We did a ladder test starting at 56 grains right up to 59 grains
57 grains and 58 grains where pretty much identical so we went with 58 for the extra velocity.
shooting out of my Sako A7 no pressure signs
shoots like a laser

Originally Posted by dannyb

yup this is exactly what I am using in my 270
145g ELDX
58 grains of ADI AR2213SC
Winchester brass
cci primers
off the top of my head speed was 2930fps or there abouts.
We did a ladder test starting at 56 grains right up to 59 grains
57 grains and 58 grains where pretty much identical so we went with 58 for the extra velocity.
shooting out of my Sako A7 no pressure signs
shoots like a laser

Bro your wasteing your time with them, 150 vld is where it's at


Sent from my iPhone using Tapatalk

Originally Posted by Smiddy

Bro your wasteing your time with them, 150 vld is where it's at


Sent from my iPhone using Tapatalk

Thats the only bullet I would run too man dont know why people bother with the eldx

Sent from my SM-G935F using Tapatalk

https://www.ballisticstudies.com/Kno...inchester.html
This is a very very interesting read

Originally Posted by 199p

Thats the only bullet I would run too man dont know why people bother with the eldx

Sent from my SM-G935F using Tapatalk

Because they work. As with the Berger you use and find works well. No doubt in the future some new bullet will be marketed and will end up being the Bees knees but till then I won't change.

Originally Posted by Mooseman

Because they work. As with the Berger you use and find works well. No doubt in the future some new bullet will be marketed and will end up being the Bees knees but till then I won't change.

That they do, bullseyed the gong at 530yds yesterday nothing wrong with the way they shoot just need to test em on some deer.