Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Night Vision NZ


User Tag List

+ Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 15 of 57
Like Tree40Likes

Thread: 280rem +162 + RE26

  1. #1
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,540

    280rem +162 + RE26

    hey all- cant find any guides for loading 280rem with 162 eldx and using RE26.......... anyone know of a safe max?

    cheers

  2. #2
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,913
    Its no good in .280. Or in any other caliber, apart from the one I have got. You need to sell your R26 to me

  3. #3
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,540
    Quote Originally Posted by Tahr View Post
    Its no good in .280. Or in any other caliber, apart from the one I have got. You need to sell your R26 to me
    bahahaha, coulda sold you a tub- but its on its way to cuz Bob in chch.
    btw craig said you may have a 7mmrm barrel floatin round?

  4. #4
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,913
    Quote Originally Posted by ANTSMAN View Post
    bahahaha, coulda sold you a tub- but its on its way to cuz Bob in chch.
    btw craig said you may have a 7mmrm barrel floatin round?
    @Brian's got it out at his place. Its a Rem - I will check it out. Not sure if he used it or not.

    Cheers

  5. #5
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,540
    @chainsaw @Tikka7mm08

    anyone else tried 162 withe re26 in 280?

  6. #6
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    CNI
    Posts
    5,811
    Not yet, switched from RL22 to N560 and got an extra 100 fps (now 2980 fps with the old 162 AMAXs) Have a couple of bottles of N560 to burn thru
    ANTSMAN likes this.

  7. #7
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,446
    LOL I switched from N560 to RE26, 2970fps 24" barrel. So similar speeds but find RE26 more stable of the two. N560 59.5gn and RE26 61gn. NB 280AI.

  8. #8
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    CNI
    Posts
    5,811
    Yep 280AI, 24 in bbl. very similar load from memory right around 60gn N560
    Tikka7mm08 likes this.

  9. #9
    Member
    Join Date
    Mar 2013
    Location
    Bell Block NZ/Northern Alberta Canada
    Posts
    1,142
    Not a .280 but a 7x64,
    3/4 to 1" five shot groups with an older Sako AV.
    I get 59gr R26 rem brass, 154gr SST, speed not checked,
    60gr R26, rem brass 154gr SSt for 2890 fps,
    61gr R26 rem brass 154gr SST for 2960 fps,
    further testing in progress.

    I have been sent quick load info, for the 162gr ELDX, in the 7x64, with an absolute max, of 59.6 gr R26, rem brass, 3.375 OAL, pressure 56000psi, 2914 fps estimate in a 22 in tube.
    chainsaw likes this.

  10. #10
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,446
    Make sure the QL info uses the H2O capacity of your fired brass. 7x64 is a ballistic twin for 280.

  11. #11
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,540
    thanks guys

  12. #12
    Member
    Join Date
    Mar 2013
    Location
    Bell Block NZ/Northern Alberta Canada
    Posts
    1,142
    Data I have from quick load, for 7x64, interchangeable to .280 Rem, start low.
    Cartridge : 7 x 64 Brenneke
    Bullet : .284, 162, Hornady ELD-X 2840
    Useable Case Capaci: 58.362 grain H2O = 3.789 cm³
    Cartridge O.A.L. L6: 3.375 inch = 85.73 mm
    Barrel Length : 22.8 inch = 579.1 mm

    Predicted Data for Indicated Charges of the Following Powders.
    Matching Maximum Pressure: 60000 psi, or 413 MPa
    or a maximum loading ratio or filling of 103 %
    These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window.
    C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
    loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
    that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
    and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
    USE ONLY FOR COMPARISON !

    19 loads produced a Loading Ratio below user-defined minimum of 85%. These powders have been skipped.
    Powder type Filling/Loading Ratio Charge Charge Vel. Prop.Burnt P max P muzz B_Time
    % Grains Gramm fps % psi psi ms
    --------------------------------- -----------------------------------------------------------------
    Alliant RL26 103.0 59.6 3.86 2914 100.0 55223 13069 1.170 ! Near Maximum !
    Alliant RL17 94.7 53.4 3.46 2894 100.0 60000 11600 1.133 ! Near Maximum !
    Alliant RL16 101.3 53.1 3.44 2872 100.0 60000 11457 1.143 ! Near Maximum !
    Ramshot Hunter 99.4 55.2 3.58 2867 99.7 60000 11909 1.139 ! Near Maximum !
    Hodgdon H414 93.8 53.4 3.46 2861 99.4 60000 11902 1.142 ! Near Maximum !
    Winchester 760 93.8 53.4 3.46 2861 99.4 60000 11902 1.142 ! Near Maximum !
    Alliant RL19 103.0 55.4 3.59 2843 98.1 58291 12122 1.148 ! Near Maximum !
    IMR 7828ssc 103.0 56.9 3.69 2830 96.1 54703 12578 1.168 ! Near Maximum !
    Ramshot BigGame 89.3 51.2 3.32 2817 100.0 60000 10828 1.147 ! Near Maximum !
    IMR 4831 103.0 53.1 3.44 2808 100.0 58417 11127 1.169 ! Near Maximum !
    Hodgdon Hybrid 100V 101.5 52.9 3.42 2808 100.0 60000 10503 1.146 ! Near Maximum !
    Hodgdon H4350 101.0 53.2 3.44 2804 98.9 60000 11220 1.141 ! Near Maximum !
    IMR 4350 99.1 53.0 3.44 2803 99.0 60000 11198 1.142 ! Near Maximum !
    Alliant RL15 89.7 48.3 3.13 2802 100.0 60000 10771 1.154 ! Near Maximum !
    IMR 4451 Enduron 94.6 50.3 3.26 2782 99.3 60000 10951 1.141 ! Near Maximum !
    Hodgdon H4831sc 103.0 56.0 3.63 2779 95.6 56005 11733 1.166 ! Near Maximum !
    Alliant RL22 103.0 56.0 3.63 2777 96.9 51194 12408 1.215
    AA MagPro 103.0 58.9 3.82 2771 92.9 50481 12736 1.223
    IMR 4166 Enduron 93.6 48.2 3.13 2756 99.3 60000 10571 1.144 ! Near Maximum !
    Ramshot Magnum 103.0 60.4 3.91 2751 97.3 50688 12007 1.213
    IMR 4955 Enduron 103.0 53.9 3.49 2722 95.5 54798 11229 1.185 ! Near Maximum !
    Alliant RL23 103.0 54.2 3.51 2695 99.9 46547 11413 1.273
    Hodgdon H4831 103.0 53.8 3.49 2660 93.7 48868 11244 1.241
    IMR 7828 103.0 53.8 3.49 2652 93.2 45096 11838 1.279
    Alliant RL25 103.0 55.1 3.57 2631 97.9 41937 11957 1.324
    IMR 7977 Enduron 103.0 54.8 3.55 2522 84.6 47284 9974 1.274

  13. #13
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,540
    ^ thanks southernman

  14. #14
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,446
    I'll run that with RE26 in QL.

  15. #15
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    CNI
    Posts
    5,811
    staggering difference between RL 25 & 26 .... seems weird.
    I thought Alliant stated when they introduced RL 26 & 23, that these were just more temp stable versions of 25 and 22 ?? really ?

 

 

Similar Threads

  1. Wanted testing jars of re17 and re26
    By rambo-6mmrem in forum Projectile and Factory Ammo Exchange
    Replies: 2
    Last Post: 24-08-2018, 11:47 PM
  2. 280rem projectiles
    By Hunty1 in forum Reloading and Ballistics
    Replies: 12
    Last Post: 18-08-2018, 07:45 PM
  3. Replies: 9
    Last Post: 21-08-2014, 07:56 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!