Thread: 300winmag

Originally Posted by dogmatix

Yep, nothing like loading up 300 WinMag.

Attachment 58777

Attachment 58778

wats the load if u don't mind sharing cheers

Originally Posted by buzzman

wats the load if u don't mind sharing cheers

Seated too far in to be hearty

Originally Posted by Gibo

Seated too far in to be hearty

Yes @dogmatix whats with that? Most 300WMs have a long throat for big bullets.

Seated to fit a mates Sako A7 magazine. He wanted mag fit, not single feed.
I was shocked at how short the internal length of the A7 mag is. Even factory ammo was touching the front.

180SSTs, as more pointy AMaxes had to be seated in further.
Only FC brass, but it's all annealed each firing, primer pocket uniformed and flash hope deburred.
CCI mag primers.
Just using ADI 2217.
Brass is redding body and lee neck sized, kept it simple.

Originally Posted by dogmatix

Seated to fit a mates Sako A7 magazine. He wanted mag fit, not single feed.
I was shocked at how short the internal length of the A7 mag is. Even factory ammo was touching the front.

180SSTs, as more pointy AMaxes had to be seated in further.
Only FC brass, but it's all annealed each firing, primer pocket uniformed and flash hope deburred.
CCI mag primers.
Just using ADI 2217.

is 2225 the go to power for the 300 winmag cheers

Cool will tweak it using 2225. Of course my issue is the bulk of the powder being seated so deep.
I did suggest single feed, but he wants magazine length.

Originally Posted by dogmatix

Cool will tweak it using 2225. Of course my issue is the bulk of the powder being seated so deep.
I did suggest single feed, but he wants magazine length.

Tell him he can have both.
I have two loads. One mag length for <300m and one single feed for >300m. I have never found that I don't have time to chamber a single feed round if I see something at a distance.