Printable View
I am about to get a tikka 7mm08, do reload rather factory. looked through most shops, most components are either not cheap or not there. saw some 308 palma case, thinking of turning them into 7mm08, wonder has anyone here done it successfully , does it require a bit of neck turning?
Iv sized lapua .308 down to .260 with no issues mate factory ammo is all but unobtainable at present my local store wont tale 708s as trade ins because of it so just make sure you can get enough components before comiting to the cartridge
Greetings @holdover,Quote:
Originally Posted by holdover
Yes I have done it with Winchester brass with no problems. The cases lengthen a little in the neck but are still within the length for the 7mm-08. The Palma cases may have thicker necks but should still be fine. If you can use a neck die rather than a FL die and do any load development using once fired brass.
GPM.
there's shit loads of once fire 7mm08 brass out there why would you bother.
most reason being small rifle primers are what's left.Quote:
Originally Posted by bigbear
Seems to be plenty of fiocchi lrp now and the reviews have them on par with fed 210s so happy days
Plenty of LR primers around now just not FederalQuote:
Originally Posted by holdover
Sent from my CPH2145 using Tapatalk
If you want to use .308 brass, one pass through a fls die, load and shoot. Do it frequently when feeling tight.
Sent from my iPhone using Tapatalk
Yeah ofcorse it’s do able
But as others have said why just get 7-08
but yes simple answer is
Yes just full length size 308 brass in a 708 die and your done
Shouldn’t need neck turning unless you have a tight tolerance chamber
I would recommend annealing the brass before and after as you are working the brass harder than normal
i have the fiocchi srp, very good in my 223 but cant find lrp anywhere.Quote:
Originally Posted by Kelton
It hit the shelves at my local about a month ago so could be worth another look but if you have the palma brass I'd go for it mate
There was a story, some years back, of someone using small rifle primers in their .308 hunting loads and having misfires in really cold weather (click and no bang). I don't know whar powder they were using.
GPM I think that may be unother urban myth and there is probably other causes present ie primers not fully seated.Quote:
Originally Posted by grandpamac
However, having said that, I have read in the Oz target shooting of shooters claiming poor ignition using Palma brass and std primers. Hence some use magnum primers. This story emerges on a semi regular basis so I have to admit there may be something to it.
I have been using Palma brass now since 2019 (admittedly not in freezing cold weather) and have had no problems. My ESs are lowered over std brass however my ave velocity is down a tad, nothing significant.
I also have Peterson SRP brass but have yet to try it.
And as you are aware primers brand to brand and sometimes within brands have differing brisance. Misfires or poor ignition may be due to using a primer with lower spark energy. Who knows.
Where are all these plenty of LR primers? The Fiocchi shipment was gone in a flash likewises any stock my local gunshops get in.
i happen to reload 6.5 crd using srp in peterson case, 100m producing 1/2 moa constantly. i am pretty confident they work well in 308. i want a longer lasting barrel but(not a meat killer), mild recoid. the 7mm08 seems to fit all that.
Sizing 308 Palma down to 708 can be done, no issues at all. Zimmer is correct, if SRP does not work in a 308 there u something else wrong(in most cases the shoulder has been pushed back to far.
Shout out if you cant find Palma brass. Ive got some Lapua Palma SRP brass(new).
Greetings,
From memory the cases were the thin Remington ones with small rifle primer pockets made for reforming into 7mmBR. A hunter had worked up loads in these for his .308 and they shot really well until he took them hunting in cold conditions where they did not shoot at all. Again from memory this appeared in Rifle or Handloader Q&A column many years ago. I know that target shooters often use the small primed cases but these are not generally shot in the same conditions. I don't remember what the powder was which could be important.
GPM.
my understanding is if it sparks it should bang, but a matter of slow or fast, sometimes under extreme cold even the lrp could not deliver the speed, thus the magnum is handy.Quote:
Originally Posted by grandpamac
Under extreme cold other things could come into play eg sluggish firing pin release due to dirty of overlubed bolt internals.
Without more specific info on the failure to fire we can only speculate.
Jonnys reloading bench on YouTube done a bit of a unscientific study on the srp thing after he found himself getting hangfires
And found that powders with poor case full was the culprit when using powders which filled the case it was no issue
But poor casefull powders were pretty consistent on hangfires and from memory he had a couple of missfires also