Is any body out there shooting over 200g projectiles out of the standard ctr.
We are looking to up the game with bc.
Currently running 168 amax out to 1200yds but trying to get to a mile!
Any help appreciated
Sent from my SM-G950F using Tapatalk
Printable View
Is any body out there shooting over 200g projectiles out of the standard ctr.
We are looking to up the game with bc.
Currently running 168 amax out to 1200yds but trying to get to a mile!
Any help appreciated
Sent from my SM-G950F using Tapatalk
do 180grn round nose count????or bt sp versions??? do use 200grn but round nose cast ones possibly not what you after LOL.....
From what I hear the LR 308 guys just run the 150/155 grain Lapua or similar pills absolutely smoking hot, BC depends on speed but you are never going to get that much out of a 19" CTR.
I’ve got some 225 eldm if you want to have a play.
I got plenty of those fof the 300 norma but honestly dont think it is the awnser.Quote:
Originally Posted by robh500
Probably just go for big thirty 1-9 twist.
Sent from my SM-G950F using Tapatalk
Im stabilizing the 200 eldx's out of the 1-11 twist, Im getting 2450fps but could push harder with 2208 or rl15-maybe others
my load sounds identical to striker, same speed from a 20" barrel using 2206h could also push them a little harder.Early days but they could be a consistent .5 load
Interesting stuff.Quote:
Originally Posted by Waimauku
I will have to have a look at the ballistic calculator to see what the advantages are over the 168 epdm and amax
Sent from my SM-G950F using Tapatalk
Hey @andyanimal31 have you considered a 178gr TMK?Quote:
Originally Posted by andyanimal31
May be the go?
I recently worked a load in my S&L 308win. 25" bbl. ELD-X 178gn. 2208. 2620fps. 0.3 & 0.5 moa groups at 300. Retained v and e look pretty good.
Hey Andy found this, might be of interest
https://www.longrangeonly.com/forum/...r-tharapy.803/
Was shooting steel with some guys a few months back. 2 moa targets and they were getting there (1600 m) with 175 SMKs using F class rigs.