Thread: .404 Jeffery Brass

Ok so after more research or should I say searching why not use 33 Nosler brass for my 330 Dakota? Same parent case 404 Jeffery basically the same design give or take a bit. Could use the 30 or 338 RUM brass but its as rare as hens teeth and I would have to knock the shoulder back a bit. So is there anyone bringing the Nosler brand of brass into NZ? Have had a pointless search around the traps and no luck. Natchez have it in the States but getting it here is the problem. There must be someone with a cunning plan out there.

Originally Posted by Dermastor

So is there anyone bringing the Nosler brand of brass into NZ? Have had a pointless search around the traps and no luck. Natchez have it in the States but getting it here is the problem. There must be someone with a cunning plan out there.

Originally Posted by Kiwi Greg

I have permits to get it out of the States if you can find some over there.

Not a cheap exercise but doable.

As mentioned no problem...

Originally Posted by Kiwi Greg

Back on track again, some brass this morning