Thread: 500 BPE load advice

Originally Posted by john m

I use 5 cork tile wads in my 450x3 1/4 bpe nitro for black loads. Kynock had cork or felt wads in there smokless ammo.

@john m thats good news about the cork tiles.

I will go to the workshop this evening ( if I haven't drunk to much ) and make a was punch out of an old Rifle Barrel section
Bore it to .510 and sharpen the outside shoulder with the compound slide on the lathe.

I did make a neck sizing plug to bump up the neck to be able to seat the projectiles

And finally have a proper dummy case to work with