Thread: 6.5 06

Originally Posted by jakewire

Yeah thats what I'm thinking, pity as I have a heap of 30 06 brass.

I used 270 or 3006 brass when I had mine.
Never tried 2506.

It is not a big issue sizing down. Still just a run thru a die or 2. But normally need a trim iirc

Sent from my SM-G965F using Tapatalk

Originally Posted by R93

I used 270 or 3006 brass when I had mine.
Never tried 2506.

It is not a big issue sizing down. Still just a run thru a die or 2. But normally need a trim iirc

Sent from my SM-G965F using Tapatalk

I tried 270 brass as I had a shit tonne but wouldn't chamber with out a neck turn so it became to much hassle went with 2506 brass. Where are you located I could put a piece of 3006 brass through my 6.5 06 die and see if it works for you

Sent from my SM-G930F using Tapatalk

Originally Posted by bigluke

I tried 270 brass as I had a shit tonne but wouldn't chamber with out a neck turn so it became to much hassle went with 2506 brass. Where are you located I could put a piece of 3006 brass through my 6.5 06 die and see if it works for you

Sent from my SM-G930F using Tapatalk

Yeah pretty sure I had to trim and turn as well.
However your kind offer should benefit the OP.

I no longer have a 6.5-06.


Sent from my SM-G965F using Tapatalk

Originally Posted by R93

Yeah pretty sure I had to trim and turn as well.
However your kind offer should benefit the OP.

I no longer have a 6.5-06.


Sent from my SM-G965F using Tapatalk

I've replied in the wrong bit, this is why you shouldn't drink and internet

Sent from my SM-G930F using Tapatalk

Originally Posted by bigluke

I've replied in the wrong bit, this is why you shouldn't drink and internet

Sent from my SM-G930F using Tapatalk

Lol! All good mate

Sent from my SM-G965F using Tapatalk