6.5 creedmoor reloading

does anyone know why i cannot view the buys sell swap thread on the NZHS site?

Quote:

---

Originally Posted by Moose.

ok thanks maybe ill give it a try, so far i tried hornady cx 120gr with win760 and I had a compressed load with seating depth way too far out.

correct me if i am wrong but superformance is a slower burning powder than 760, so wouldnt i have the problem of needing too much powder with not enough space,
appreciate everyones input, im only a beginer reloader.

---

Yes it is slower and will work fine with 120 up to 147grn

Sent from my CPH2531 using Tapatalk

Quote:

---

Originally Posted by Moose.

does anyone know why i cannot view the buys sell swap thread on the NZHS site?

---

Not enough posts yet, superformace is a very fine powder fit more than enough in every case iv tried it in

Quote:

---

Originally Posted by Kelton

Not enough posts yet, superformace is a very fine powder fit more than enough in every case iv tried it in

---

yeah sweet,
ok sounds like i should give superformance a go, if you guys think ill be able to get enough powder in with seating depth

factory reload data shows Vihtavuori 550 with COL 2.82 inch and 41.4 g with a full case.
so i would need to exceed that charge with Superformance, to get similar velocity in my shorter barrel

Quote:

---

Originally Posted by Mick Hunter

How much RL16 are you running for that?
I am considering playing the with the 120BT in my creedmoor and use RL 16 at the moment with a 140 sst

---

44gr in ADG LP brass.

Sent from my SM-S906E using Tapatalk

Quote:

---

Originally Posted by Moose.

yeah sweet,
ok sounds like i should give superformance a go, if you guys think ill be able to get enough powder in with seating depth

factory reload data shows Vihtavuori 550 with COL 2.82 inch and 41.4 g with a full case.
so i would need to exceed that charge with Superformance, to get similar velocity in my shorter barrel

---

What's the rifle you are shooting it in.
I'm sure you will get enough in it.
Is you seating depth set off the lands or are you governed my mag length

Sent from my CPH2531 using Tapatalk

I take it all back looks like that short of barrel will give you a bad burn rate with superformance 2208 is showing a potential of 2722fps it’s a great powder and available good case fill that’s with a 120BT superformance was showing inconsistent burn and topping out around 2730fps anyway it likes the heavier projectiles