Cheers all,
checked the stem and projectile is not bottoming out
Checked 50 projectiles on the comparator plus minus 0.0005 so they are good, agree on the comparator it is a bit of a knack.
Remeasured the loads and sorted them by + spot on and -
Only a few were under and only by 0.001 so pretty spot on
The larger were put back in the press and checked then re measured. No change.
Then I noticed that the larger rounds the primers sat a little proud hence the longer measurement.
I will use these first with the barrel break in rather than try to seat the primers in a live round…
The unloaded rounds I’ll check and reseat if primers found to be high.
Rifle is a seekins havak bravo, scope is a Tract toric 4.5-30 x 56 with tier one rings
Hoping to get into PRS going forward and the odd hunt, like the technical challenge of it used to go to the Clevedon range before the kids were born up to 1000yrds.
Appreciate the help. Think I can call this one sorted now.
Sent from my iPhone using Tapatalk
Bookmarks