Thread: 6.5x47 with a Lee Collet Die

Originally Posted by 10-Ring

Did you repeat that at least four times to prove that was the maxim in your particular rifle?

no need as it shoots better than I can and seems to be winning a few comps just how it is so if it's not broken leave it!

Sent from my SM-G900I using Tapatalk

Originally Posted by andyanimal31

no need as it shoots better than I can and seems to be winning a few comps just how it is so if it's not broken leave it!

Sent from my SM-G900I using Tapatalk

Well you can't expect better than that.

The only reason I askeded my previous question to you was that I've seen so many shooters shoot one good group and proclaim that their rifle was a .5 MOA shooter or something similar. You're obviously too experienced to be fooled by that.

I do think (and have experienced it many times) that excessive runout has a detrimental effect on accuracy for certain types of shooting such as target or long range shooting. For hunting under 300m? Probably makes little or no difference.

Originally Posted by 10-Ring

Well you can't expect better than that.

The only reason I askeded my previous question to you was that I've seen so many shooters shoot one good group and proclaim that their rifle was a .5 MOA shooter or something similar. You're obviously too experienced to be fooled by that.

I do think (and have experienced it many times) that excessive runout has a detrimental effect on accuracy for certain types of shooting such as target or long range shooting. For hunting under 300m? Probably makes little or no difference.

proof is in the pudding today when the dirty old tikka stock standard with standard Hunting loads cleaned up today at the manawatu and taihape deerstalker 300 comp against some pretty nice rigs.
I think 138 out of 150 possible. 15 shots
paper don't lie!

Sent from my SM-G900I using Tapatalk

you could shorten a 6.5x55 lcd easily they are not hardened. Lee sells Mandrels with different diameters fairly cheap special order and they will send them to New Zealand I have done this. As far as the bushing die goes how is your neck tension? if it is tight this might be contributing to the run out? but it sounds like you have it totally sorted with that cmpetition result. nice shooting.