Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
Like Tree21Likes

Thread: 6.5x55 loads in a T3?

  1. #1
    Member canross's Avatar
    Join Date
    Jan 2017
    Location
    Chch
    Posts
    603

    6.5x55 loads in a T3?

    Hey folks,
    thought I would get the forum's input on good hunting loads for a bog standard T3 in 6.5x55. Shot 6.5x55 years ago out of Swedish Mausers, but didn't keep any of my records for the loads.

    I can always work my way through the manuals but odds are someone's already done that and found some good consistent middle of the road velocity and pressure loads to start with.

    I already use IMR 4350 and ADI 8208 but don't mind using other powders. Also very interested in input on projectiles.

  2. #2
    Member
    Join Date
    Dec 2011
    Location
    taihape
    Posts
    3,585
    45grns of 09 and 140 eld-match cheers

    Sent from my SM-G960F using Tapatalk
    Beaker, superdiver and canross like this.

  3. #3
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,070
    Greetings Canross,
    I have a 6.5 x 55 T3 just like yours and have developed loads for the 120 grain Sierra spitzer flat base and the 129 grain Hornady SST. 6.5 x 55 data is varied and confusing. I believe that these loads are a little under max and have given no problems in my rifle.

    120 grain Sierra flat base projectile, Norma cases, Federal 210 primers and 46 grains of current AR2209. LOA was 77.5 mm. This chronographed 2,870 feet per second. Nosler listed a max load of 47 grains of AR 2209 behind their 120 grain ballistic tip so a little under max.

    129 grain Hornady SST projectile, Lapua cases, Federal 210 primers and 45.5 grains of current AR2209. LOA was 78.5 mm. This chronographed 2,805 feet per second. I also tried 46 grains of AR2209 with this projectile which is likely max and chronographed 2,850 feet per second.

    The listed data for the 129 grain projectiles is confusing. I did a thread some time back on developing this load which you may want to look at.

    These loads should only be used with thin jacketed projectiles like the three mentioned. Loads for projectiles like the accubond need to be reduced and for the Barnes solid projectiles even more. Both have on line data you can look up. All the best, it is a great calibre.
    Grandpamac.
    canross likes this.

  4. #4
    Member
    Join Date
    May 2020
    Location
    Nelson
    Posts
    157
    Hi Canross

    I am a novice reloader, but my good friend is very experienced and helped me develop a load for my 6.5x55 Tikka when I first started out. I am using 49 gr of Vitavhouri N560 matched with Hornady A-Max or Hornady Eld-X projectiles (velocities at around 2770 fps). No signs of pressure and very accurate.
    canross likes this.

  5. #5
    Member
    Join Date
    May 2016
    Location
    Blenheim
    Posts
    1,159
    Lapua brass, winchester primers cos I have lots, eldx 143 grain seated to 3.11 coal and use ADI 2209 powder in the 44 - 50 grain range. Velocity approx 2770 from memory. That’s in my Tikka Forest. One hole at 100metres. Vortex Viper optics.
    canross likes this.

  6. #6
    northdude
    Guest
    i tried 140s in my t3 but i found it shoots way better with 120gr im using 120 sierra match kings and 2209 they seem to work on animals as well
    canross likes this.

  7. #7
    Member
    Join Date
    May 2019
    Location
    Rotorua
    Posts
    180
    RWS brass, Fed 210 GM primer, Sierra 130 TGK at 80mm in the Carl Gustaf 3000 I am loading for. Reloader 23 started at 45 gr and worked up to 48.5 gr for 2812 fps with sub 1/2" 3 shot groups at 100m. No pressure signs so I will load up to
    50 gr in .5 gr increments.
    canross likes this.

  8. #8
    Member Feral's Avatar
    Join Date
    Feb 2014
    Location
    Blenheim
    Posts
    648
    Quote Originally Posted by Ingrid 51 View Post
    Lapua brass, winchester primers cos I have lots, eldx 143 grain seated to 3.11 coal and use ADI 2209 powder in the 44 - 50 grain range. Velocity approx 2770 from memory. That’s in my Tikka Forest. One hole at 100metres. Vortex Viper optics.
    Only one hole cos the others missed the paper eh, hur hur hur...

    Sent from my SM-G935F using Tapatalk

  9. #9
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    3,009
    Case of 2209 behind a 140eldm. Cheap, easy and a good time for you but not the deer!

  10. #10
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    4,025
    143 gr ELDX with 49 grs AR 2213 SC CCI LR primers and Norma Brass, COAL 79 mm. Have shot some very nice groups with this load. It is fine in my T3 but suggest working up to this in your rifle. We have been using the 143 gr ELDX in my 6.5 x55 and Brother-in laws 260 Rem both generating 2772 fps( 260) and 2754 fps in Swede and have excellent results on game from 40 yards to 528 yards.

  11. #11
    Member
    Join Date
    May 2016
    Location
    Blenheim
    Posts
    1,159
    Thanks Feral. Cheeky bugger. I’ll take your 300 winmag on any day out to 800m. Oh hang on...did that!
    Feral and canross like this.

  12. #12
    sneakywaza I got
    Join Date
    May 2013
    Location
    Fairlie
    Posts
    3,589
    T3 6.5 Swede I sold to to that Swede lovin Taihape bloke had an 18" barrel, it was going 2800 with 140 Amax and VLD, with more barrel, comes more velocity.

    Swede in a modern action - load it like you mean it.

    Now I want another one!

  13. #13
    Apparently the 2 biggest cunts on here lol Philipo's Avatar
    Join Date
    Dec 2011
    Location
    Palmy Nth
    Posts
    3,518
    Yup there's is only one person who comes to mind when I think of NZ's expert regarding the mighty Tikka 6.5 swede @andyanimal31
    Shoot it, root it & then BBQ it !!!

  14. #14
    Member
    Join Date
    Dec 2011
    Location
    taihape
    Posts
    3,585
    Quote Originally Posted by Philipo View Post
    Yup there's is only one person who comes to mind when I think of NZ's expert regarding the mighty Tikka 6.5 swede @andyanimal31
    Not a person he is a God,happy birthday bro

    Sent from my SM-G960F using Tapatalk
    Philipo and canross like this.

  15. #15
    Apparently the 2 biggest cunts on here lol Philipo's Avatar
    Join Date
    Dec 2011
    Location
    Palmy Nth
    Posts
    3,518
    Cheers mate
    buzzman likes this.
    Shoot it, root it & then BBQ it !!!

 

 

Similar Threads

  1. More 270 Win Loads
    By Mooseman in forum Reloading and Ballistics
    Replies: 57
    Last Post: 28-08-2020, 09:31 PM
  2. 6.5x55 142gn Accubond Long Range loads
    By quentin in forum Reloading and Ballistics
    Replies: 34
    Last Post: 25-01-2017, 08:34 PM
  3. 6.5x55 loads that work in the t3
    By northdude in forum Reloading and Ballistics
    Replies: 20
    Last Post: 18-04-2016, 09:25 AM
  4. Howa 6.5x55 loads
    By andyanimal31 in forum Reloading and Ballistics
    Replies: 13
    Last Post: 09-08-2012, 01:10 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!