Thread: 7 prc Sammi

Originally Posted by Stocky

Honestly hate this as was hoping for a short action. Read awhile ago this was intended for a long action. Biggest issue is the 180s are going to be even harder to find if they come out.

So you were hoping for a SAUM? Yea iv being hunting for 180s for a long time moving my attention to 195s now . Like a slightly shortened LRM with a shorter neck

Originally Posted by Kelton

So you were hoping for a SAUM? Yea iv being hunting for 180s for a long time moving my attention to 195s now . Like a slightly shortened LRM with a shorter neck

Pretty much more brass availability factory clambering with decent twists etc. If like the 6.5prc many extended mag short actions etc. I have some 195s that I would trade if you do sort out 180s. I also would have liked a 7mm Creed as well to suit the 162s

Originally Posted by Stocky

Pretty much more brass availability factory clambering with decent twists etc. If like the 6.5prc many extended mag short actions etc. I have some 195s that I would trade if you do sort out 180s. I also would have liked a 7mm Creed as well to suit the 162s

Few 7 creed wildcats about they seem to do well . Iv stopped looking for the 180s and will just look for 195s now . The 6.5 prc had it not being for the factory factor is a waste of time except it’s not because of the factory factor and fast twist factory rifles. It’s all in the marketing. The prc actually manages to paint the wheel and call it new with all the marketing hype and obviously us the consumer giving it the sales . They were clever with their Sammi specs . the 7 will be the same some where in the 8 twists heaps of hype heaps of factory rifles

Plenty saum brass but the factory factor is beyond pour but that leaves room for really light weight slap together bitsa rifles with the appropriate sized actions

Originally Posted by Stocky

Pretty much more brass availability factory clambering with decent twists etc. If like the 6.5prc many extended mag short actions etc. I have some 195s that I would trade if you do sort out 180s. I also would have liked a 7mm Creed as well to suit the 162s

I've got a 7mm Creed that throws the 160tmk @2880fps with 41.3gr 2208.....
Works mint for me, longest kills being 2 goats at 725meters

Originally Posted by lau lau

I've got a 7mm Creed that throws the 160tmk @2880fps with 41.3gr 2208.....
Works mint for me, longest kills being 2 goats at 725meters

Thats amazingly efficient.

Originally Posted by lau lau

I've got a 7mm Creed that throws the 160tmk @2880fps with 41.3gr 2208.....
Works mint for me, longest kills being 2 goats at 725meters

That is very good bbl length?

Originally Posted by Kelton

That is very good bbl length?

40inchs lol.

Originally Posted by Kelton

That is very good bbl length?

24inches

Originally Posted by lau lau

24inches

Now that’s something I can get behind bridges a gap between the humble 7-08Rem and 7Rsaum . I’m sure the 7x57 and others alot in their also

I was hoping they would do it off the 300 prc but this sounds pretty cool. I reckon that by the time these reach nz in 5 or 6 years I'll be ready for one

Originally Posted by Rated M for Magnum

I was hoping they would do it off the 300 prc but this sounds pretty cool. I reckon that by the time these reach nz in 5 or 6 years I'll be ready for one

7-375R 7 blaser mag 7 LRM fast twist 7RM all fit that bill mate none factory iv corse