Thread: 708 questions

OK owners of rifles using this round what sort of bullet weights and speeds do you get.
Yesterday a neighbor came to use my range to try out some new amo for this queen of calibres.
Curious as i dont know anyone else with one I tagged along and took the chrony.
He normally uses federal blue box 150 but had a few different 139s to try.
The rifles a Tikka t3 cut to 19 inches, the blue box chronied at 2450 fps, and both lots of the 139s at 2684 and 2680, he seemed pleased but I thought them pretty pedestrian, my m43 762x39 russian matches the blue box and my 308 pushes a 165 gr bullet faster than the 139 bullets he was trialling.
The results left me less than impressed with the 708, is this normal?

i have a short 16.5 inch 708 im getting those sorta speeds from the factory stuff.
hand load 139 going about 2750ish
120s going 2850
both warm esk.
the barrel chop cost me 200-300 fps , kills the same though.

Seems slow to me for 19" tube. My tkka does 2800 with 150gn eldx. That's with a full case of RL17 and 20" barrel.

I'd have expected the fed 150 to be at least 2600ish and the 139 2700ish with that barrel length. Sure the chronograph is reading okay?

I load for accuracy, not speed...

22 inch barrel

162 Amax : 2600 fps
120 Nosler BT : 3050 fps

14 inch barrel

120 Sierra Pro Hunter : 2645fps

The chrony was running right I had the 223 with me and it read 3050 for 1 shot which is right. Federal say on the box 2600 something but that would be in a test barrel though.
We should all load for accuracy over speed ebf, but these seemed a bit dawdly in my opinion accuracy seemed pretty ho hum as well but that was probably just him.

308 will always do better than a 708 from a short barrel.
My 20" 708 gets 2707-fps with Hornady Precision hunter 150ELD-X, mild reload's I get 2754 with 140Gr SGK and 2657 with 154 SST's (slightly warmer load)
Federal Fusions do better with a shorted barrel than blue box for some reason

16" barrel I'm running Hornady ELD-M 162gr at 2600 fps. Stopped when my groups tightened up.

Originally Posted by joelhenton

16" barrel I'm running Hornady ELD-M 162gr at 2600 fps. Stopped when my groups tightened up.

You using pure nitroglycerin? That's extremely fast for a 162gr from a 16" 7mm08.

Originally Posted by GWH

You using pure nitroglycerin? That's extremely fast for a 162gr from a 16" 7mm08.

I loaded a mates 18" 708 doing 2660 with 162eldx. Spicy would be the term I would use

Originally Posted by GWH

You using pure nitroglycerin? That's extremely fast for a 162gr from a 16" 7mm08.

@GWH your comment makes me want to reevaluate my load but I've not been aware of any serious pressure signs... What would you expect to be a max velocity load, using CFE223?

Pretty similar from mine: Truflite 22" barrell
Im getting 2840 for 139sst/140AB's, and 2760 for 150ELDX using. AR2208 pretty mild loads, about 0.5' accuracy

#stopfuckinshorteningriflebarrels

Originally Posted by 7mmsaum

#stopfuckinshorteningriflebarrels

No shortening is ok just don't complain about speed haha. Have learnt my lessons over the years

Originally Posted by 7mmsaum

#stopfuckinshorteningriflebarrels

Hahaha,

The 14 incher is not only short, it is a wee little pencil thing... 0.625

Originally Posted by 7mmsaum

#stopfuckinshorteningriflebarrels

But I enjoy hunting with my rifles so much more after they have been shortened! Latest is my rem mag getting chopped from 24” to 21”. Loving it!