Thread: 7lrm load development

Being in my possession for a few weeks now daylight hours make it hard this time of year and a young family keeps me busy on the weekends so a day off was in order.

Promising speed with more to go .

Tried both fed 210 and fed 215 as powders right on my cross over between the two of 70gns and intresting enough it was like a switch up to 70gns 210s were the winner and the 215 shinned after 70.

Back to the range in the morning before work as my last 5 rounds and a new box of projectiles were all jammed . Teach me for not checking and a lesson to always check between boxs the previous box was seating 20thou off and is also some of the original 180eldm from years ago the latter box is the latest lot im not sure if they have tweaked the shape or its just standard hornady junk.

Regardless they shoot well would have put 20 shots into an inch today.

Get thisnrange trip out of the way in the morning with the last of my ladder and will shoot some groups.

Cheers

oh nice bro, that looking promising!!

Good looking range too
Like the look of that carpet on the bench

Sent from my SM-G950F using Tapatalk

Originally Posted by kukuwai

Good looking range too
Like the look of that carpet on the bench

Sent from my SM-G950F using Tapatalk

Its being a work in progress the local guys driving the project have being nothing short of legendary with the rework to regain and keep our range cert .
It was closed for a period of time/shut down by the powers of who ever but the remedial work has happend certs gone threw and constantly getting tweaked be a small handful of gents keeping it moving wilsons wanganui have being a driving force were bloody lucky . The carpet has made a world of difference the mtn bipod didnt like the bare ply

should be starting my 300saum in a few weeks

Originally Posted by Larskramer

should be starting my 300saum in a few weeks

Look into that kaimai gen 2 bro another mates got one going on his 7saum i like what im hearing

yeah i will if i cant fid mu hardys ultra mag on ( stock might just be in the way )

What powder you running ?

In the works is 2225 2217 and rl26 thinking 2217 may be the winner but yet to try 2225

Originally Posted by Kelton

In the works is 2225 2217 and rl26 thinking 2217 may be the winner but yet to try 2225

2225 works better than 2217 in my 7prc so probably behave similar/same in your 7LRM

@6.5 CRD it went brilliant in my blaser mag to far more accurate than the 26 load never got a speed off it as it was on the eve of lock down but it would have being within 50fps id say

Rl26 does give a little more speed than 2225 in my 7prc with the 175 eldx, right around 50fps. Doubt the deer care its 50fps slower though & 2225 is alot cheaper & easier to find haha.

Yip neither here nor their at high speeds found a good node at 3100 time to shoot some groups and validate

Nice weapon oright. Which 7mm is your favourite? Do you like the short action or the long action . 20 shots into and inch ;must like the projectile.