Thread: 7mm 150 eld-x load info for 7mm08

Originally Posted by superdiver

Obviously you know work up to loads but I just sussed a mates 18" tikka seated to the lands with 39gr of 2206h getting 2660fps in lapua brass and magnum primers getting about 0.7moa . Wouldn't go any hotter as was at the limit of my pressure signs. Means he has plenty of oomph a long way out but still not.doing silly speeds up close so shouldn't worry about over expansion

Sweet yeah just kinda wonted to know where to start, we run 2206h at the moment with 139sst. Was going to start at 40gr, but will take your advice on board and maybe start at 38 and work up in 0.5 gran until we start seeing signs then back off slightly and hope she groups ok