7mm Rem Mag- Load- Starting Point

Hi guys- long time....

Anyone got any load data for 7mm Rem Mag w/ 168 Berger VLD's?
Ultimately wanting to achieve approx 2900-3000fps at the muzzle but not sure where to start with powder types or weight.

Any starting point info would be greatly appreciated.

Cheers!

This is going from memory. Federal large rifle magnum primer, ADI 2217 71.5gr. Gave 3060fps from a 26” barrel.
Projectile was jammed 15 thou into the lands.

go try the nosler 140gr partitions instead.
i can give you a few to try if you want (loaded rounds not projectiles)

Cheers Stug.
Barrel is 24" custom carbon with stealth over-barrel suppressor.
Maybe worth starting at 68gr and working up?

I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
What sort of range are you getting out of the noslers @gonetropo?

Quote:

---

Originally Posted by Richie

I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
What sort of range are you getting out of the noslers @gonetropo?

---

well my best shot was a hare at 983m ( though it did take several rounds to get the bugga)
i no longer have reloading gear so as i get thru the rounds you are welcome to the empties

Start at 69 - 70 gn and work up carefully

Cheers for the help everyone!

I use 168vld over 73.5g 2225 in my rem mag

Gives me 3050 out of a 21.5" pipe

Quote:

---

Originally Posted by Richie

I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
What sort of range are you getting out of the noslers @gonetropo?

---

right so you keep ONE factory round aside...set up your dies for length/seating depth with it...giving you same or VERY similar bullet jump you are half way there.... velocity will be somewhere between 3/4 and maximum...being a factory loading it wont be super hot and being federal shouldnt be too mild.... you could if you happend to know what powder was used in factory load pull a round and measure it.... or if had chronicgraph fire factory load and keep going with reload till find same velocity...... or just put a not too hot load together and go shoot something.

Quote:

---

Originally Posted by Micky Duck

right so you keep ONE factory round aside...set up your dies for length/seating depth with it...giving you same or VERY similar bullet jump you are half way there.... velocity will be somewhere between 3/4 and maximum...being a factory loading it wont be super hot and being federal shouldnt be too mild.... you could if you happend to know what powder was used in factory load pull a round and measure it.... or if had chronicgraph fire factory load and keep going with reload till find same velocity...... or just put a not too hot load together and go shoot something.

---

Federal will be mixing powders to get a 'secret recipe' I would imagine-
Yea going to just work up load to same (or very similar but maybe slightly higher) velocity as you say.

Quote:

---

Originally Posted by gonetropo

go try the nosler 140gr partitions instead.
i can give you a few to try if you want (loaded rounds not projectiles)

---

Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
Seem to only be able to find 150gn noslers?
Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!

Quote:

---

Originally Posted by Richie

Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
Seem to only be able to find 150gn noslers?
Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!

---

AR2213SC 63,5grains for 3150 foot per second at the muzzle

Quote:

---

Originally Posted by Richie

Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
Seem to only be able to find 150gn noslers?
Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!

---

That’s far to dare $220 max

Quote:

---

Originally Posted by Kelton

That’s far to dare $220 max

---

Yea, think I cooked the number there... picked up 100 for $180 today with another 100 on hold, so back to plan A it is!

Mates one which is a sako rebarrelled and long throated is the following

168gr Berger VLD
2.743”
73.0gr 2217/H1000
CCI 250 mag
Norma brass
3150fps

This is way over book max but safe in his rifle but definitely work up