Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Alpine


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 27
Like Tree26Likes

Thread: 7mm08 or .243 Subsonic round

  1. #1
    Member
    Join Date
    Jan 2015
    Location
    Christchurch
    Posts
    305

    7mm08 or .243 Subsonic round

    Hey all

    Has anyone looked into or developed a subsonic round for 7mm08 (24"barrel) or .243 (18" barrel)?

    Any starting points would be much appreciated

    Cheers

  2. #2
    Gone but not forgotten
    Join Date
    Apr 2017
    Location
    Hamilton
    Posts
    4,129
    Powder charge will vary a lot depending on the projectile, cast bullets needed 8 grains of Trailboss in my 308 but the sub-x bullets needed 11 grains.
    The cast bullet loads were 7.5 grains in my other 308 and the 30-30, so 7.5-8 grains of Trailboss is probably a reasonable place to start in the other 08 cases with cast bullets
    Micky Duck likes this.

  3. #3
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,881
    if you are using 150s in the 7mm 08 it will be really similar to what Cigar's saying as thats what it was in my 308 as well
    243 might be a little less but it really depends on the pill you use

    start above what you need with trailboss as stuck projectiles are a real drag to get out of your barrel
    Pengy likes this.

  4. #4
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    You wil probably have stability problems with 150 gr bullets in the 7mmo8 the standard 1:9.5" and 1:9" twists
    mat not stabilise them the 120 grain is the best option,
    Same with the .243 use the lighter varmint bullets the 1:10" is barely able to stabilise the 100 grain bulles.
    Bill999 and Micky Duck like this.

  5. #5
    Member
    Join Date
    Apr 2016
    Location
    Rotorua
    Posts
    474
    I've run 140gr Sierra pro hunters in a 20" Tikka 7mm08 and they shot well. I rung steel out to 300m.
    145 Speers wouldn't stabilize 130's would.
    I'll have to check my load out when I get home, from memory it was less than 10 hrs Trailboss.
    Just remember no expansion what so ever so no good for hunting.
    BC doesn't matter, until you need to dial

  6. #6
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    Yep ran some of shooternz’s cast projectiles in my 7/08. Stability no issues. Shot a couple of goats with them, not the best killers. I think because the hollow point is not as big a diameter as the .308 ones. Think I’ve still got the recipe some where. They did kill possums well though. Also great training rounds for my daughter.
    Micky Duck likes this.

  7. #7
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    Yep ran some of shooternz’s cast projectiles in my 7/08. Stability no issues. Shot a couple of goats with them, not the best killers. I think because the hollow point is not as big a diameter as the .308 ones. Think I’ve still got the recipe some where. They did kill possums well though. Also great training rounds for my daughter.

    Here is my thread on them.

    https://www.nzhuntingandshooting.co....-report-39740/
    Micky Duck likes this.

  8. #8
    Member
    Join Date
    Jul 2012
    Location
    Hamilton
    Posts
    713
    Quote Originally Posted by stug View Post
    Yep ran some of shooternz’s cast projectiles in my 7/08. Stability no issues. Shot a couple of goats with them, not the best killers. I think because the hollow point is not as big a diameter as the .308 ones. Think I’ve still got the recipe some where. They did kill possums well though. Also great training rounds for my daughter.

    Here is my thread on them.

    https://www.nzhuntingandshooting.co....-report-39740/
    Does shooting cast projectiles require alot of extra barrel cleaning? i.e. is the cast lead soft enough to leave some behind in the bore??

  9. #9
    Member
    Join Date
    Feb 2017
    Location
    Jafa land
    Posts
    5,441
    why do you want sub sonic 243? the appeal of 243 is shooting 100gr super fast

  10. #10
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    said it before...and will end up saying it again.... subsonics suck if you miss your mark by even a tiny amount,they are however great fun for plinking,they are much more civilised for finishing off shots up close....and awesome for pests up close,for wallabies or goats in deer country,good solid chest shot will see them fall over soon enough,spinal colume and they will drop...you can get expansion with cast,and you can have best of both worlds by cranking them up JUST A LITTLE BIT and getting some meaningful expansion.a little more energy with very little more noise....
    75/15/10 black powder matters

  11. #11
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    Quote Originally Posted by gqhoon View Post
    Does shooting cast projectiles require alot of extra barrel cleaning? i.e. is the cast lead soft enough to leave some behind in the bore??
    I think it is only an issue if shooting higher velocity lead. Subs don’t seem to be an issue.

  12. #12
    Member
    Join Date
    Nov 2016
    Location
    South Island
    Posts
    1,192
    The bigger the cal and weight, the better for subs. Since they don't have the velocity they rely on weight and cross sectional area for knockdown.

  13. #13
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,812
    Quote Originally Posted by Allizdog View Post
    The bigger the cal and weight, the better for subs. Since they don't have the velocity they rely on weight and cross sectional area for knockdown.
    Thread drift but you are 100% correct, watch the bullet go all the way and then.........................................
    Carbine, tikka, Micky Duck and 1 others like this.

  14. #14
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    that video you showed Mikee does show whats possible IF you want to spend the coin,on the very best in projectiles and spend the time and projectiles to work out trajectory 100% corectly .... but other than the lack of noise it does nothing a supersonic round cant do better with less fuss.
    75/15/10 black powder matters

  15. #15
    Member
    Join Date
    Apr 2016
    Location
    Rotorua
    Posts
    474
    @Strider B my 7mm08 was 9.5grs Trailboss for 1052fps. You will need a bit less for your 24inch barrel.
    Micky Duck likes this.
    BC doesn't matter, until you need to dial

 

 

Similar Threads

  1. Recommend a 300BLK factory subsonic round
    By MB in forum Reloading and Ballistics
    Replies: 8
    Last Post: 30-03-2022, 11:17 PM
  2. Subsonic 22LR round for hunting?
    By MB in forum Varminting and Small Game Hunting
    Replies: 71
    Last Post: 11-05-2016, 06:45 PM
  3. 7mm08 subsonic load
    By HNTMAD in forum Reloading and Ballistics
    Replies: 6
    Last Post: 22-04-2016, 07:18 PM
  4. 7mm08 tikka all round load for a starter
    By rogers.270 in forum Reloading and Ballistics
    Replies: 19
    Last Post: 31-08-2015, 11:33 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!