Thread: 7mm08 loads and a short barrel

Originally Posted by STC

No overpressure isnt a brick wall that you run into...

the other way around... its metal parts hitting your stubborn head at high velocities. And quite frankly, as long as it is only your head I won't loose any sleep over it, despite wishing that everything goes well.

Anybody please: If you run overly hot loads and only rely on the visual appearance of the deformation of a piece of brass with unknown properties: Please do not test these loads at a busy range, only test them at your bros farm where if the gun blows up you only injure yourself and not any innocent bystanders...

Any accident involving multiple people will no doubt eventually lead to tighter regulations for reloaders, and as always will only punish those that actually have a clue of what they are doing...

Alright, I'll give you some attention.

Explain to us in as great a detail as you can; what the definition of a maximum load is, for my rifle, for your rifle, and everybody else's rifle, when you know you are at that threshold, what the SAAMI pressures are based on and how accurate the ballistics programs are.

(Also you are assuming I am using this load, and you in particular have done it without checking before being deliberately offensive.)