7x57 AI reamer

Anyone have one or know where I can hire one?

Cheers.

Didnt i just read someone had/was importing one?

I'm not sure but been thinking/reading maybe 280/280 AI if anyone has access to a reamer.

cheers

Jed on Fish n" Hunt has one. He seems like a good bugger:)

Quote:

---

Originally Posted by Wildman

Jed on Fish n" Hunt has one. He seems like a good bugger:)

---

I was talking to him in the weekend, he is getting great accuracy but not a lot of speed :(

Quote:

---

Originally Posted by Kiwi Greg

I was talking to him in the weekend, he is getting great accuracy but not a lot of speed :(

---

2850fps would be plenty for me.

Quote:

---

Originally Posted by Kiwi Greg

I was talking to him in the weekend, he is getting great accuracy but not a lot of speed :(

---

What do you call not a lot of speed.... my 6.5 version pumps the 140's out at 3K with 2213 without any issues.... how short is his barrel?

Quote:

---

Originally Posted by Wildman

2850fps would be plenty for me.

---

Thats a good speed for a downloaded 7mm08:thumbsup:

Quote:

---

Originally Posted by leathel

What do you call not a lot of speed.... my 6.5 version pumps the 140's out at 3K with 2213 without any issues.... how short is his barrel?

---

He was getting 2750 ish from memory.

I was trying to talk him into using 2213 instead of 2209 :)

I'm sure we could get more speed out of it :ORLY:

Quote:

---

Originally Posted by 7mmsaum

Thats a good speed for a downloaded 7mm08:thumbsup:

---

With 162gr A-Max's and a 24" barrel? I doubt it.

Talked to him yesterday and 2850 with the A-Max's was what he said I think. That is sufficent for me.

Howdy,

I have a 7x57AI reamer and the go and no-go gauges. The chamberings pretty rare in NZ, the only other reamer I know of is with Status Guns. Barrel is 24" screwed in a Sako 75 LA. I've only just started playing with load development and have found a sweet spot at 2725fps with the 162 amax and 2209, so yep she's pretty much a warm 7-08 for the time being. I've run out of time before I head away for a hunt but when I’m back I'm keen to find a load round the 2800 mark for the amax, that was the plan when I started down the 7x57AI path so will take Gregs advice and try 2213. During a ladder test 2850fps was achievable without pressure signs I couldn't pass up the accuracy at 2725fps . 2900fps and there was an extractor mark, stiff bolt and the overriding self preservation feeling kicked in...

I'm not sure if the reamer would clean up a factory 7-08 chamber?

Quote:

---

Originally Posted by Jed

Howdy,

I have a 7x57AI reamer and the go and no-go gauges. The chamberings pretty rare in NZ, the only other reamer I know of is with Status Guns. Barrel is 24" screwed in a Sako 75 LA. I've only just started playing with load development and have found a sweet spot at 2725fps with the 162 amax and 2209, so yep she's pretty much a warm 7-08 for the time being. I've run out of time before I head away for a hunt but when I’m back I'm keen to find a load round the 2800 mark for the amax, that was the plan when I started down the 7x57AI path so will take Gregs advice and try 2213. During a ladder test 2850fps was achievable without pressure signs I couldn't pass up the accuracy at 2725fps . 2900fps and there was an extractor mark, stiff bolt and the overriding self preservation feeling kicked in...

I'm not sure if the reamer would clean up a factory 7-08 chamber?

---

Great to see you finally got here :thumbsup:

Quote:

---

Originally Posted by Wildman

With 162gr A-Max's and a 24" barrel? I doubt it.

Talked to him yesterday and 2850 with the A-Max's was what he said I think. That is sufficent for me.

---

Good point Wildman, I had presumed a 140g projectile was being used.