Thread: ADI 308 Projectiles / Load development

Originally Posted by Tahr-Bound

Interesting.. In my target rifle I'm running lapua brass and the OTM lapua scenars 12 thou jump 42.5gr 2206h and that's heavily compressed. 2960fps ish. I must have a very short throat if you guys can get 45gr into your loads.

Yip, that sounds quite short.

Normal club loads with 2208 is 45.0, I started seeing some pressure signs around 45.5

For 155 Scenars I am using 44.5 2206h with no issues, my go-to long range load, used these out to 1200 @ Wairarapa superlongs, in comparison the 2208 loads were getting suspect above 900yds.

Switching to Dyers for next season, can't get any moe Scenars from NRA...

Originally Posted by ebf

Yip, that sounds quite short.

Normal club loads with 2208 is 45.0, I started seeing some pressure signs around 45.5

For 155 Scenars I am using 44.5 2206h with no issues, my go-to long range load, used these out to 1200 @ Wairarapa superlongs, in comparison the 2208 loads were getting suect above 900yds.

Switching to Dyers for next season, can't get any moe Scenars from NRA...

Really? why not? There was ammo orders done down here a few months ago through the club.

Originally Posted by Tahr-Bound

Really? why not? There was ammo orders done down here a few months ago through the club.

Too expensive apparently. The options we got were noslers and dyer hbc (?mk2)

Originally Posted by ebf

Too expensive apparently. The options we got were noslers and dyer hbc (?mk2)

Bugger. Nosler customs I guess. I buy all my own anyway so I'll stay with scenars I think. May give the bergers a hoon to see if they'll work in this barrel.