hey you fellas with the 7 rem mags , any of ya usin the ADI powders? if so which stuffs workin for 140gr -150gr ?
hey you fellas with the 7 rem mags , any of ya usin the ADI powders? if so which stuffs workin for 140gr -150gr ?
I used AR2213 with 150gn BTs.
Experience. What you get just after you needed it.
2213 or 2217 should be a good start mate. 2225 is on the money too but probably better if you’re in the 160gr range
Depends a bit on your barrel length - I use 2213 in mine, but 2209 is as accurate, just a tad slower.
Roger, innnteresting.
it is a Rem 700 sps, so i thiink 24 inch barrel on it.may even be 26? sorta wanting to shoot a decent bonded projie like a woodleigh out to 400 or so , reasonably flat as possible, not keen on the recoil as of yet so stayin with a 140gr for now, will be trying to load them fairly warm to make as big as improvement over the 7mm-08 as i can in terms of its trajectory..
itl do whats needed once it gets there, or hits the mark.
split on 2217, 2213sc, 2209 as can use in other Cartridges like the 3006? but if it is a bit slower, its not what im after really.
my 7-8 is around 2700 fps for bush stalkin, this thing needs to be in the 3-3100 bracket im thinkin
Federal fusion pills might be good for your purposes. I've another 'new to me' rem mag that ill run bare for general use. Ill prolly download 140s to ,~2900 or might go full load 120gr barnes.
I'm using win760 which is cheap here and I use it in other cartridges.
What animals and country are you hunting over there?
2213 with nosler 140gr
I was getting 3163fps with AR2213 and the 150gn Ballistic Tip from a standard 24" T3. Very accurate too.
Experience. What you get just after you needed it.
2217 for 162s 22-24in.
2213 can work too, I’ve used it on shorter barrels. 18-22in.
22 inches Sako barrel and 162 eld -X
2213sc COAL 3.415
65gn 2782fts
65.5gn 2818fts
IMR8133 162 eld -x COAL 3.415
75.5gn 2957fts
75.8gn 2963fts
76.1gn. 2990fts.
Those three groups all under 3/4 MOA and no pressure sign.
IMR8133. 180 vld hunting
Coal 3.434
72.8gn 2827fts
73.1gn 2850fts
73.5gn 2865fts
2 inches groups
Rees, the 7mm RM with a 160 shoots like a 30/06 with a 180. You may as well load 160s and get what you paid for. Don't stand at the trough and try to dribble it out.
Rees if you want to go 140/150 gn weight have a play with the tsx and tsx. Driven hard they perform well and the RM can do that.
No thanks Dicko, im guna stand back an let it splash until it gets to the trough.. eh.
cheers legend
il be spewing if this 7rm shoots like a 3006 with 180gr i tell ya lol.
Bookmarks