Thread: ADI powder for 7RM

Cheers mate. Yea worked up with no pressure signs, surprised as you say since it's well over max. Tested some eldm the other day and looks like the sweet spot for that is around 70 grains

Originally Posted by Link

Cheers mate. Yea worked up with no pressure signs, surprised as you say since it's well over max. Tested some eldm the other day and looks like the sweet spot for that is around 70 grains

for the same amount of powder and similar speed you would have less pressure using 2225 or 2217 just my 2 cents again no hate

Originally Posted by dannyb

for the same amount of powder and similar speed you would have less pressure using 2225 or 2217 just my 2 cents again no hate

Yea that's what I used to run in my old 7mm with good results, however didnt provide the accuracy I was after in this shooter.

Originally Posted by Link

Cheers mate. Yea worked up with no pressure signs, surprised as you say since it's well over max. Tested some eldm the other day and looks like the sweet spot for that is around 70 grains

Link did u Find a lower accuracy node at all? and aim for the higher? im not near 70, but not near 3000 either.

Had a good lower accuracy node with 2217 but opened up as I tried to increase velocity to where I wanted it.