Thread: Annealing after sizing?

That makes sense to me.

But this is all I used for years to deprime. You could even make one.

https://www.rebelgunworks.com.au/pro...apping-die-pin

Originally Posted by Oldbloke

That makes sense to me.

But this is all I used for years to deprime. You could even make one.

https://www.rebelgunworks.com.au/pro...apping-die-pin

That's all I used for several years when I first started out. A Ramset concrete nail ground down on the end to fit primer pocket flash holes.
To get going I also made many bits and pieces - reloading blocks, funnels, drop tube, mil serp brass primer crimp cutter, various designs of simple primer pocket cleaners, and so on. I have only bought flash harry reloading blocks in recent years but still have and use my old home made wooden blocks.
The quality of ammo loaded in my old wooden blocks is just as good as the commercial plastic ones