Thread: Anyone loading 7mm Rem Mag using 175 EDL-X and N560?

Afternoon

I have been loading 162 AMax for years using N560 obtaining very good velocities and accuracy from this powder. Fallen at last to Hornady's marketing and just picked up a box of 175s to play with and am interested to see if anyone else is loading this combo and any suggestions for a starting load. I have the Vihtavouri app and obviously can use that info, however my loads for the AMax are quite a bit above what is in the app.

Cheers

AMac

N560 might be a little fast burning for the 175 ELDX in the rem mag.

I've used AR2213sc and 2217 with the 175 ELDX and got better results velocity wise with the 2217. Both gave good accuracy but the speed just wasn't there with the slightly faster burning powder. Like 2700 to 2800 fps with 2213 and up around 2950 fps with 2217 with good accuracy.

Hope that's helpful

Originally Posted by Rated M for Magnum

N560 might be a little fast burning for the 175 ELDX in the rem mag.

I've used AR2213sc and 2217 with the 175 ELDX and got better results velocity wise with the 2217. Both gave good accuracy but the speed just wasn't there with the slightly faster burning powder. Like 2700 to 2800 fps with 2213 and up around 2950 fps with 2217 with good accuracy.

Hope that's helpful

Forgot to mention, this is in a 24" barrel Sako A7

I know people getting great results with 180s in Rem Mags with either RE26 or R33

I’d be going with a slow burn powder, like @GWH has mentioned or RL25 or 2225.

Thanks guys - N560 tis all I have to play with at the moment. Will give it a go at the range this weekend with a starting point >10 grains lower than I have been loading up the Amax and increase in .5gn increments and see how I get on.

N560 did get the 162's moving - 3150 before I had the barrel cut back to 22" and a DPT added, this saw a drop back to 3100. But those loads no longer relevant cause they too hot using a new batch of powder. Those 175's have much longer bearing surface than the old AMax so caution would seem to be a good idea.

Cripes Gun City has RL2225 @$75/lb RL26 $90/lb N560 is 139/lb!!!

I’d try what you have and if no good I know my mate is using 2225 with the 175s. Failing that maybe something like Rel 26

Yip I used 2225 and 175 eldx a touch over 3000

https://bergerbullets.com/pdf/7mm-Remington-Magnum.pdf

You could start around the same load data at you own risk for the 175 berger elite. They have n560 in there data so i couldnt see why it wouldnt work.

Obviously work your pressures up. Bullets arnt identical so be cautious.

Are any of you guys running these at mag fit in a tikka?

I did have these at mag length in my A7 (3.340") I think Tikka is 3.36? Only tried with 2225 and got around 2800fps with 70.5 grains at that length. 24" barrel again.

Thanks RMM - the 2217 results you put up on Danny B's thread were pretty impressive. If I change powders I was thinking a 2217 might be a better option for a 22" barrel as is a bit faster than 2225. I would be happy I if I could get to 2900 with the 175 out of a shortish barrel. Cheers

Originally Posted by AMac

Thanks RMM - the 2217 results you put up on Danny B's thread were pretty impressive. If I change powders I was thinking a 2217 might be a better option for a 22" barrel as is a bit faster than 2225. I would be happy I if I could get to 2900 with the 175 out of a shortish barrel. Cheers

Ha ha I really need to stop recommending that powder to other people

All good hopefully we get some more 2217 in the country some time soon as well. I really enjoy experimenting with different loads, especially loads that shouldn't be the ideal just to see if they will work.

Cheers