Thread: Anyone loading Vit N320 in 45ACP or 9mm?

Anyone loading Vit N320 in 45ACP or 9mm?

G'Day Spanners,

Unfortunately, MY .45's (x 4) were taken from me with out my consent (FJWH)!
Just finished loading 500 .38Super Comp with Vhit N340.
I use the following load in my Kimber 5" Stainless Target II.
Lapua cases
Hornady 125grn HAP bullets taper crimped in place
7.0grns of VhitaVuori N340
CCI 550 Small Pistol magnum primers
1300fps

Vhit 340 is also OK for 9 x 19 Luger.

Hope that helps

Doh!
Homer

I've been using N320 to load 147 FMJ FN and 125 FMJ Rn for a while now in 9mm.
For the 147's I was using 3.5 grains for about 900fps to make a power factor of 132 out of my CZ Shadow.

Just made up a few loads to test for the 125's of 3.8, 3.9 and 4.0 grains.
Bit interested to see how they go as the max for those pills is supposed to be 4.0 grs but I may need to load over that in order to make power factor.

Can let you know how they go.

Spanners I load my 3.9 grains behind a 124 CMJ for 1040 FPS out of my shadow and 5.1 grains behind a 230 cast for around 810 FPS in my SR1911.

Herb