AR2208 168 Amax

Anyone load AR2208 and AMAX? is 45gr a hot load? Its under max and i get no pressure but its accurate.
Wondering if i should try go higher? its in a 308 for hunting ideally at all ranges out to 600

It might be a compressed load depending on your internal brass capacity and seating depth according to the ADI guide.
It's the most accurate powder charge you have, why go higher?

My std 308 load is , 45gr 2208 , CCI BR2 primers & 175gr SMK in Lapua brass , gets me 2665-2700fps , 24-26 inche barrel , never had a problem with it .
Seems accurate in most of my 308 rifles so far .
You could easily use this with say a 178gr Amax bullet .

Quote:

---

Originally Posted by NewbieZAR

Its under max and i get no pressure but its accurate.

---

Your answer right there.:)

Quote:

---

Originally Posted by ChrisF

My std 308 load is , 45gr 2208 , CCI BR2 primers & 175gr SMK in Lapua brass , gets me 2665-2700fps , 24-26 inche barrel , never had a problem with it .
Seems accurate in most of my 308 rifles so far .
You could easily use this with say a 178gr Amax bullet .

---

A mate of mine is playing with a 178 amax in his right now. I just run some numbers thru Quickload this morning for him.

46g of 2208 would appear near max pressure, that was using an overall length of 2.95"

Start lower of course.

My advice having been there and done that with the 168 out of a 308 is use the 178 instead.

The 168 will work great +300y on deer but so will the 178 with less windage and the 178 will work reliably at less than 300y were the 168 will not.

Anyways I was running 47gr 2208 fed magnum primers lapua brass 75mm OAL for 2750fps out of a 22" barrel.

This was a warm load work up!

I still recommend the 178 or perhaps the eldx I have not tried yet over the 168 unless all shots on deer sized game are over 300y

And also why develop a load with the amax? Hasent it been discontinued and replaced by the eldm and eldx?



Sent from my SM-G800Y using Tapatalk

Quote:

---

Originally Posted by veitnamcam

My advice having been there and done that with the 168 out of a 308 is use the 178 instead.

The 168 will work great +300y on deer but so will the 178 with less windage and the 178 will work reliably at less than 300y were the 168 will not.

Anyways I was running 47gr 2208 fed magnum primers lapua brass 75mm OAL for 2750fps out of a 22" barrel.

This was a warm load work up!

I still recommend the 178 or perhaps the eldx I have not tried yet over the 168 unless all shots on deer sized game are over 300y

And also why develop a load with the amax? Hasent it been discontinued and replaced by the eldm and eldx?



Sent from my SM-G800Y using Tapatalk

---

Good data, I said amax, but I believe @VTR is using 178 eldx.

@veitnamcam
Why the magnum primers, thinking of the same 178gr in the 30 06.
Is it because of the smaller case and larger bullet, better ignition?
cheers.

Quote:

---

Originally Posted by jakewire

@veitnamcam
Why the magnum primers, thinking of the same 178gr in the 30 06.
Is it because of the smaller case and larger bullet, better ignition?
cheers.

---

More velocity for a given powder charge

Ta.