Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Alpine


User Tag List

+ Reply to Thread
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By Dicko

Thread: Ar2213

  1. #1
    Member
    Join Date
    Feb 2019
    Location
    Tarras
    Posts
    1,387

    Ar2213

    Just found a tub and a bit of ar2213 (old tin tubs) I run a Rem 700 270 anyone have a pet load for 130ssts or 100gr hp that I currently load with

  2. #2
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    hell yes..... BUT BE AWARE my rifle has long throat and loose bore so approach with caution..... run it at maximun....eg 60 grns for the 130s and 62 for the 100grns,that what I poke in behind 110 barnes..... 60 grns will fill to base of neck,62 will be to top of neck...crunchy crunchy when seating projectiles.
    the 2213 and hodgdon powder 4831 are now the same powder...I find the hodgdon slightly bulkier...but that could be because the AR2213SC is now cut shorter..thus the sc ... I run magnum primers cause thats what Ive got and go back a few years and 50% of load data called for it in this type of load.mine are seated out to mag length,nowhere near rifling as throat is too long for that.
    funny if you look back at old data they had more 4831 than 2213 in a case.....look at modern loads and its the same.

    SAFE IN MY RIFLE...WOULD BLOW UP MATES...APPROACH WITH DUE CAUTION!!!!

  3. #3
    Member
    Join Date
    Feb 2019
    Location
    Tarras
    Posts
    1,387
    This stuff hasn't got the sc written on it

  4. #4
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    that cause its more than 15??? years old.... ADI made it short cut (sc) about that time ago...i think to make it metre easier??? still same powder yours is older and in bigger granuals.
    adi or hodgdon websites will have data for it....

  5. #5
    Member
    Join Date
    Feb 2019
    Location
    Tarras
    Posts
    1,387
    All there data is sc

  6. #6
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    2nd edition ADI manual printed 1996.....page 26/27 .270 winchester
    has 2213 130grn projectile max of 58 grns
    has 2213 100grn projectile ma of 61 grns
    also has at bottom of page NB use magnum primers with 2213 and 2214 powder loads.

  7. #7
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    Nick Harvey manual 3rd edition

    100grn projectile 58grns for 3150fps----61 grns for3250fps
    130grn projectile 55grns for 2920------58grns for 3098fps


    which just shows why you have to be cautious and start low then work up.......

  8. #8
    Member
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,632
    Load data is the same for both versions of this powder. I’ve been to 63 gns behind a 130 in a long throated R700 , .270Win. 58.5gns behind a 150. You could start around 57, 58 and work up from there in 1.0 increments.
    Micky Duck likes this.

 

 

Similar Threads

  1. AR2213 equivalent
    By Malhunting in forum Reloading and Ballistics
    Replies: 6
    Last Post: 11-03-2014, 07:53 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!