Thread: Ballistic program's. Which is best

Originally Posted by jim160

I need to sort out the load development and drop charts for the 190 & 210g Bergers. I have been using 155g so there is some work to do.

Any ideas of a starting load for a 30-338 win mag. I have some load data in Winchester powder but curious what the max & min load is for ADI powders. Then I would have a starting point. Most stuff I've found is in every powder except adi.

Any ideas or suggestions

Quickload gives the following MAX loads and velocity based on a 26" barrel

190 berger AR2209 69gr 2991fps
190 berger Ar2213SC 71gr 2970 fps

210 berger AR2209 66gr 2834 fps
210 berger AR2213SC 68.5gr 2820fps

I can bring a chrony on Saturday

Originally Posted by NZShoota

Quickload gives the following MAX loads and velocity based on a 26" barrel

190 berger AR2209 69gr 2991fps
190 berger Ar2213SC 71gr 2970 fps

210 berger AR2209 66gr 2834 fps
210 berger AR2213SC 68.5gr 2820fps

I can bring a chrony on Saturday

Compared to the Hodgdon/Adi 300 Win mag data the weight differences between those two powders is a little close, are they the same pressures according to quick load ?

Originally Posted by Kiwi Greg

Compared to the Hodgdon/Adi 300 Win mag data the weight differences between those two powders is a little close, are they the same pressures according to quick load ?

Pressure up around 60600psi for both powders /loads. It only gives a rough indication.

Originally Posted by NZShoota

Quickload gives the following MAX loads and velocity based on a 26" barrel

190 berger AR2209 69gr 2991fps
190 berger Ar2213SC 71gr 2970 fps

210 berger AR2209 66gr 2834 fps
210 berger AR2213SC 68.5gr 2820fps

I can bring a chrony on Saturday

Thanks for the offer, but the NI Chrony should be arriving today for me to use.
I'm doing some shooting on the weekend. I don't have the Bergers yet. Picking them up on Saturday as well.

Might get some 2217 and give that a go as well to see if that's better.