Thread: Ballistic truing conundrum

Originally Posted by chainsaw

The “1.3in” above is the height of POI (centre of grp) above POA at 100 yards. I checked this at the range a week ago. I agree it might not be exactly zero at 200, but it’s within a gnats whisker. The scope height is 1.6in and I used that input to Ballistic calcs.

OK, as I say I'm doing this all the time.
Make your point of impact smack on at 100 then validate from that.
If you want a 200 zero just leave your scope set on that.
I can guarantee this works otherwise you will out clever yourself!
If you have a kestrel 5700 you have the best ballistic solver on the market.
I'm using mine daily and it's never wrong as long as you put the right info in

Sent from my SM-A226B using Tapatalk