Thread: Bench Mark 8208 powder and the .303

Originally Posted by Jhon

Apart from folks specific experience, ADI publishes data online from 115gn through to 175gn projectiles for 7mm08

Sweet I'll do some reading sounds like it could be my one powder to do all maybe

Originally Posted by Remmodel7

Sweet I'll do some reading sounds like it could be my one powder to do all maybe

Maybe. Just a question of finding a good node for your rifles..there are far more experienced reloaders on this forum than me. But I've found its almost a waste of time, not to mention components, to do incremental tests starting with the min charge. Or with the max for that matter. In a time of shortages try starting with just two, the two down from max. In my own experience they almost always give me the best accuracy at acceptable velocity. Not always always, but nearly. If your intent on bettering the result, you can always go up or down. But if you just want a good killing load with decent accuracy there is a strong likelihood that one of those two will do the job.