Benchmark 2 for 308

Hi all. Is anyone here loading 308 with ADI benchmark 2?
Have plenty of the powder so keen to try use it... just wondering what peoples results are and what weight projectiles they are using?
I know there is better suited powders but this is what i have and this is what I'm going to use.
Cheers

its pretty close to ar2206 which is pretty good in .308
I say pick a load say 2 grains below book max and see how it goes... if you have lots of it,go for it.

I run BM 8208 which is hotter than 2206H. epends what you are trying to push with it. Have you got access to a ballistic program to try it out like quickload.

Quote:

---

Originally Posted by Micky Duck

its pretty close to ar2206 which is pretty good in .308
I say pick a load say 2 grains below book max and see how it goes... if you have lots of it,go for it.

---

That sounds like a plan to me. Next mission will be getting some projectiles. Reviews on Dr google seem pretty good.

Quote:

---

Originally Posted by johnd

I run BM 8208 which is hotter than 2206H. epends what you are trying to push with it. Have you got access to a ballistic program to try it out like quickload.

---

Looking at something between 130-160gr not too fussed as long as it shoots well enough.
No im not really up with the ballistics apps etc...
Just test loads until im happy with it. Keeping it simple here.

My memory is scratchy, but I believe a quick dirty load I did was 150gr SST, 43gr BM2, Lapua case, CCI 200. 2650ish from a 18" barrel. Bergara extreme hunter.

Attachment 218128

Quote:

---

Originally Posted by Beavis

My memory is scratchy, but I believe a quick dirty load I did was 150gr SST, 43gr BM2, Lapua case, CCI 200. 2650ish from a 18" barrel. Bergara extreme hunter.

Attachment 218128

---

Looks like it did the job ;)
Great to hear BM2 is definitely usable from the comments.

Data – Rifle – ADI World Class Powders and Ammunition

Was good with lighter pills from memory

I use it for 130gr speers and it is very accurate. Never chronographed it though so can't comment on velocity.

I played with BM2 in .308 a few years ago with 150grn FMJ projectiles.

It worked acceptably, but there was a very fine line - .2gn from memory - between no pressure signs and popped primers.

Work up to your load with caution.

Great thanks for your experiences and advice guys just sorting out some dies then I'll be into it.
Cheers

if you dont find any soon,and are close by,my set sitting here gathering dust and could be BORROWED.

Quote:

---

Originally Posted by Micky Duck

if you dont find any soon,and are close by,my set sitting here gathering dust and could be BORROWED.

---

Thank you for the offer MD. I have managed to swap my rem mag dies for some .308 so just waiting for them to arrive.
Cheers

@Kiwilad2021 how did you get on with Benchmark 2 and your load development?

I've struggled with 150g SST and 2208 out of a 16in Tikka (should be easy to do right...) BUT found that some 168g ELDMs with IMR3031 are a much more accurate load. Hoping that Benchmark2 will be pretty similar to 3031

Have a crack with Gordon Reloading
EX Attachment 234267

Quote:

---

Originally Posted by Jukes

@Kiwilad2021 how did you get on with Benchmark 2 and your load development?

I've struggled with 150g SST and 2208 out of a 16in Tikka (should be easy to do right...) BUT found that some 168g ELDMs with IMR3031 are a much more accurate load. Hoping that Benchmark2 will be pretty similar to 3031

---

Yeah pretty good. I found 42gr of bm2 with speer 150gr btsp @ 2.800 is awsome in my 16inch under an inch group at 100m and have smoked deer out to 300m with that load.
Im also using 45gr 2208 with 150gr interlocks 10thou off the lands which clover leafs at 100m.