Berdan primed/crimped?

What's the deal/process with Bersan primed cases- what and how do you do to be able to prime the cases?

I have berdan primers.
What case are they.

The primer is removed using the depriming tool, and then the berdan primers are seated to the desired depth, and then you are good to go.

There are other ways by hydraulic using water.

I'm sure others on here will know far more than me.

Have never done them but that's what I've been told is what has to be done.

They're Lapua cases.

Actually it's gonna be far more mahi than it's worth so will flag it.

Quote:

---

Originally Posted by ANTSMAN

Actually it's gonna be far more mahi than it's worth so will flag it.

---

Your best bet would be to offer them for sale here if you have not got the hydraulic decapper, crimp remover and the necessary primer seating tool….as well as the primers. I’ve used berdan 6.5x55 and it’s good brass

What brass is it.

Yep once the first time has been done and the remaining crimp removed it's all very easy. Some brass brands are virtually impossible to deprime manually, I have some very good ADI F4 ball here which is very high quality brass but the crimps on the primers effectively mean you need to do the inital deprime in a lathe and cut the military primer and crimp out then flick the remaining side wall of the primer cup out before final swaging and prep of the primer pocket. It's almost like there's a full crimp around the rim of the primer's cup with three additional deep swages - total overkill when you consider the amount of surface area of the in total four primer retaining points. Such a pain in the arse because the brass is very good and after the first deprime it's actually quite easy to reload Berdan cases.

Quote:

---

Originally Posted by No.3

Yep once the first time has been done and the remaining crimp removed it's all very easy. Some brass brands are virtually impossible to deprime manually, I have some very good ADI F4 ball here which is very high quality brass but the crimps on the primers effectively mean you need to do the inital deprime in a lathe and cut the military primer and crimp out then flick the remaining side wall of the primer cup out before final swaging and prep of the primer pocket. It's almost like there's a full crimp around the rim of the primer's cup with three additional deep swages - total overkill when you consider the amount of surface area of the in total four primer retaining points. Such a pain in the arse because the brass is very good and after the first deprime it's actually quite easy to reload Berdan cases.

---

Many of the footscray batches are also glued in with a sealant (I softener with the flame of a candle first and then hydraulic them out with a sledge hammer) Some of the best brass ever made

Quote:

---

Originally Posted by jim160

What brass is it.

---

Lapua mate

Quote:

---

Originally Posted by ANTSMAN

What's the deal/process with Bersan primed cases- what and how do you do to be able to prime the cases?

---

What caliber are they?
If you're going to flag it 'll take them off your hands if you want.
Phil.

Quote:

---

Originally Posted by ANTSMAN

Lapua mate

---

Sorry, I meant what calibre are they.

Quote:

---

Originally Posted by ANTSMAN

What's the deal/process with Bersan primed cases- what and how do you do to be able to prime the cases?

---

Or use shotgun primers.

Attachment 240227