Thread: Best adi powder data

correct BUT you wouldnt have had pressure issues and 24.5grns of AR2206h behind projectiles between 45-55grns IS A PLURRY GOOD LOAD......it has been my go to for years n years...20ish...only in last 6 mths have I tweaked loads a little to see what bit more speed will do.

Originally Posted by Micky Duck

correct BUT you wouldnt have had pressure issues and 24.5grns of AR2206h behind projectiles between 45-55grns IS A PLURRY GOOD LOAD......it has been my go to for years n years...20ish...only in last 6 mths have I tweaked loads a little to see what bit more speed will do.

Greeting Micky,
Agreed but there are some real hot loads in there as well. ADI and I suspect NH listed a load of 55 grains of AR2213 behind the 140 grain projectile in the 6.5-06 up until about 2000. 3,100 fps was claimed for the load. A cobber who had a 6.5-06 worked up to the load and got close to the velocity. Great load accurate and non of the usual signs of pressure. Just one small problem. Primer pockets wouldn't hold a primer after one shot. Hodgdon and NH dialed back the load to 49.5 grains of the slower AR2213SC with the 140 grain Speer GS projectile after the 6.5-06 A Square came out.
Regards Grandpamac.