Printable View
Hi im looking at investing is a single stage press at some point..... I have been doing a fair amount of research and from what i can see the three stands outs are the Forster co-ax, the Rockchucker supreme, and the Redding big boss 2. I think the co-ax is a bit out of my budget. What is everyones opinions on the Rockchucker vs Redding big boss 2?. i have heard the Rockchucker can make a bit of a mess with primers but that can be fixed.
Co-ax, it is in a different league.
Both the other presses are nice, nothing wrong with either of them.
Cheers Ebf i have read alot of good things about the co-ax its an ugly beast.
I've got a Forster Co-Ax and a Redding T7 turret press.
There's not much the Redding can't do and its way more convenient to use when reloading multiple calibres. The Forster is great for resizing big brass, everything else I do on the T7
If you can afford it go with a turret press.
cheers for that, the biggest i will be resizing will be a 30nosler, what is the advantage of the turret press other than holding multiple dies? i have looked at the T-7 and it looks awesome, i am only reloading for three rifles when the 30nosler is finished.
I think the co ax and the T7 are in the same price bracket ....close
I moved from BB2 to a T7 and really like it. There was nothing wrong with the BB2 and it is a great smooth press, they are probably at the top of the range for common single stages.
And built in the US as opposed to many others now outsourced to China.
The other advantage to the T7 is the set and forget factor, theres something about the heft and operation of them that I like.
just had a quick look on youtube at both models didn't find one reloading , do you have to hand load a primer into the cup ?
They both have on press priming, i think the redding you can get a magazine style priming tube also.
Cheers for that johnd, i think the BB2 may be the go for my budget. its a shame when companys send things to china to be made to become more competitive/ make more money. So the reloading quality was the same between the T7 and the BB2?
Sierra Bullets has a Redding T-7 that they loaded one million rounds on it and when tested it had zero run out and is as new. There are some news articles/press releases out there on it.
Yes the Rock Chucker makes a mess with primers. I think it's an ok press but I see a Redding in my future.
What I have found is with Redding you pay, but it's well made quality.
I have a T7, the benefit to me is time, less mucking about changing dies.
When I reload 223 I use 4 dies: Resizing, M Die for flaring the case neck, Seating, and Crimp. I like to set everything up and have it running sweet at the beginning.
yeah thats impressive i havnt seen that article. i think the window on the big boss is quite a draw card being quite open. cry once a?
i can definatley can understand why you would have the T-7 with the multiple die setup. not sure it for me but maybe it could be good future proofing. I didnt think anyone crimped anymore. or crumped.Quote:
Originally Posted by Max Headroom
I havent really done any run out tests, they use the same ram and I think the stroke is the same length, they also use the same on board priming method. I would say the quality is the same. They do take a bit of run in time where the ram is a bit "gritty"Quote:
Originally Posted by Tim Dicko
My BB2 went to a forum member, and it was probably just run in :) Well OK,.... well run in :pacman:
Depriming is always a bit messy but with the "down the ram hole " that redding employs it is a lot cleaner .... maybe 1 in 20 will bounce back out of the ram, but if you dont use the onboard priming method then the hole can be blocked off with a bit of foam etc and then its like Colditz ( no one escapes )
Swapping between large and small primers is a bit of a fiddle. But if you only use one size primer then the on board would be OK.
Personally I use a bench mounted priming system that is easier than a handheld device.
I have a bb2 and like it except for seating primers. I prefer seating primers with a lee primer seater which attaches to any press.
I also have a forster co ax which is excellent but does not suit hornady dies with drop sleeves although these are ok in the bb2.
It would be interesting to see the run out results for sure, i think the press would be similar to a toyota landcruiser, brocken in at 500,000kms. Im sure the on board priming would be fine getting started out. the volume ill be reloading wont be to serious. Cheers for the feedback.Quote:
Originally Posted by johnd
you must be another one of these forum gear hoarders. with back ups for your back ups. ill have a look at these lee primers never heard of them i assume they speed things up a tad. I am started to get into the way of thinking dont sell anything.Quote:
Originally Posted by Woody
Anyone had any experience with the rcbs summit press? I'm looking between that and the rock chucker for reloading a 30 nosler and 284
if you look at the ultimate reloader 14 press shoot out, look at page 14 on the website and there are all the results for the shoot out including summit and rockchucker. The summit dosnt have factory on press priming, they are both excellent presses by the looks of the results page. Ive got a 30 nosler coming.Quote:
Originally Posted by cameronjackwhite
https://ultimatereloader.com/2019/04...tage-shootout/Quote:
Originally Posted by cameronjackwhite
go to very bottom of the first page. Then go to page 15 of the results. He also talks about features of all the presses.
Ooh this man is cheating. Nailed it.T7 has been a huge and satisfying investment.Quote:
Originally Posted by Max Headroom
I have a Rockchucker made in 1965 it is still as tight and smooth as when it left the factory you will never wear out any of the big name presses in a couple of life times.
cheers shooternz for the feedback:ninj:Quote:
Originally Posted by shooternz
I have both RC and Redding BBII set up. Personally the over cam on the RockChucker, to me makes it the better press. The build quality of both are outstanding. The primer collector on the Redding is more convienient, but not enough when compared to the other advantages of the RCBS. Personal preference at the end of the day.
I was just having a look at you instagram. the rockchucker looks good a. looks a bit bigger. Hows it for coal and all that?Quote:
Originally Posted by 300AAC