There certainly was a nice stock under there
It's a pretty unusual piece of walnut
Attachment 230066
Attachment 230067
Printable View
There certainly was a nice stock under there
It's a pretty unusual piece of walnut
Attachment 230066
Attachment 230067
And the grips took a long time to clean out but now look and feel awesome
Attachment 230069
Attachment 230070
neat to see this getting such attention and it looks great
The pineapple detail on the finial and nice engraving on the fore end rod pipe
Attachment 230072
Attachment 230073
Have you tried sweating the oil out? I have had pretty limited success with solvents,the old oil wicked into the cleaned wood fibers.
Yes I've tried a few different techniques in the past.
But in this one I've stuck with solvents and then turps to clean.
Alternated solvent turps, solvent turps etc.
In this case that was the safe option.
The bottom metal and finial, front engraved pipe, butt plate and hooked reciever are so tightly inletted into the wood that I chose not to tempt fate and remove them.
They all have very tight engraved screw heads.
The old dry gun oil had effectively glued the wood and steel together.
Solvents got in to the edges pretty well and the stock has cleaned up better than I expected.
Also with this being a genuine well used original I still want it to show its age and that it has not just been a cabinet queen
I think that some of the grain in the stock looks very tight and under tension, obviously not or it would of split, but it looks like a difficult piece of timber to shape
It's a "beautiful" thing.
The travel case is now fully functional.
Repaired where able
Parts replaced where beyond repair
The whole thing rejuvenated
Attachment 230919
Attachment 230920
Attachment 230921
[QUOTE=akaroa1;1483549]The travel case is now fully functional.
Repaired where able
Parts replaced where beyond repair
The whole thing rejuvenated
@akaroa1
Would this handle suit it better? also found old possibles bag if you want it,bit rough but could tidy up alright.
Attachment 231184
Attachment 231185
[QUOTE=Tedz50;1484898]Cool @Tedz50
They both look useful.
Due to drop in and see you when I'm in town maybe next week.
Starting to get the itch to get away and take it hunting now that we are seeing some sunshine down here for a change
the photos dont do this justice.......a great privilidge is was indeed to make it make some noise..thankyou again....maybe next time I shall hit what Im aiming at a bit better/flinch less LOL....he says hanging head in shame.
And now I need to re regulate it all over again
Different tighter fitting balls and thinner patches
So really a start over and try and get them back together at 50m
But Yes, pulling the already fired front trigger and associated flinch was a real "own goal"
Footage of faux pas 🙂