Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
Like Tree10Likes

Thread: Blaser R93 loads, 7mm mag and 223

  1. #1
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058

    Blaser R93 loads, 7mm mag and 223

    I've done a quick load development for both the 7mm rem mag barrel and 223 barrel.

    Name:  Blaser R93.jpg
Views: 4349
Size:  273.5 KB
    The 7mm rem mag load is 162 amax seated 50 thou off the lands, 71gr 2217, winchester brass and federal 215 primer, average velocity is 2854. I could shove a bit more powder in, but it is shooting well enough for me.
    I cleaned the barrel of all the copper, put an oiled patch through, then a dry patch. Shot 1 and 2 were high, with shot 3 landing where I had it two days ago. I adjusted the scope 2 clicks down and 1 click right, then shot the 3 shot group. Could go 1 click more to the right.
    Name:  Blaser 7mm mag target.jpg
Views: 593
Size:  69.6 KB

    The 223 load is 50gr TTSX seated 50 thou off the lands, 26.5gr H335, Hornady brass, federal 205 primer, avg velocity 3266fps.
    I did the same as the rem mag barrel, clean copper, oil, dry patch. Shots 1 and 2 were out a bit, shot 3 was where I had it two days previously. I then fired another 3 shots without adjusting the scope.
    Name:  Blaser 223 target.jpg
Views: 654
Size:  89.5 KB

    Off hunting next weekend.
    Attached Images Attached Images  
    outdoorlad, R93 and PERRISCICABA like this.

  2. #2
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    That will take care of business, is that a carbon stock?
    Shut up, get out & start pushing!

  3. #3
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    Yep it is. Weighs 550g without the chassis in. Saved about 400g over the off-road stock.
    outdoorlad likes this.

  4. #4
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,644
    One for the r8 next stug
    Barefoot likes this.

  5. #5
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    Need a stock to make a mold from. Also I think the screw for the rear of the chassis comes up through the pistol grip on the R8, cetainly does on the Professional success stock, not sure about the professional stock.

  6. #6
    Lovin Facebook for hunters kiwijames's Avatar
    Join Date
    Feb 2012
    Location
    Hawkes Bay
    Posts
    7,205
    When are you taking orders for the R93 stock?
    The range of what we think and do is limited by what we fail to notice. And because we fail to notice that we fail to notice, there is little we can do to change; until we notice how failing to notice shapes our thoughts and deeds

  7. #7
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by kiwijames View Post
    When are you taking orders for the R93 stock?
    Wait your turn Jimmie.

    I'm first😆

    Im dropping my rifle off on the weekend and he is not to be distracted by a poo 4 3 advocate😆


    Sent from my SM-G935F using Tapatalk
    Blaser and kiwijames like this.
    Do what ya want! Ya will anyway.

  8. #8
    Lovin Facebook for hunters kiwijames's Avatar
    Join Date
    Feb 2012
    Location
    Hawkes Bay
    Posts
    7,205
    I want the full report. Since you're going to be out tf town I think it's only right @stug sends it to me to trial for you first.
    Blaser likes this.
    The range of what we think and do is limited by what we fail to notice. And because we fail to notice that we fail to notice, there is little we can do to change; until we notice how failing to notice shapes our thoughts and deeds

  9. #9
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by kiwijames View Post
    I want the full report. Since you're going to be out tf town I think it's only right @stug sends it to me to trial for you first.
    He says it should be done just as I get back to NZ.

    I might send you a pic of it but after you and Brads had fun violating my v3 I won't be letting you touch it😆

    It still works ok but has a funky smell.

    Sent from my SM-G935F using Tapatalk
    Do what ya want! Ya will anyway.

  10. #10
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    Quote Originally Posted by stug View Post
    Yep it is. Weighs 550g without the chassis in. Saved about 400g over the off-road stock.

    Nice work, you are going to be popular
    R93 likes this.
    Shut up, get out & start pushing!

  11. #11
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,480
    Quote Originally Posted by R93 View Post
    Wait your turn Jimmie.

    I'm first��

    Im dropping my rifle off on the weekend and he is not to be distracted by a poo 4 3 advocate��


    Sent from my SM-G935F using Tapatalk
    And you wait your turn!! There's heaps of us waiting for non blaser stocks

  12. #12
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Gibo View Post
    And you wait your turn!! There's heaps of us waiting for non blaser stocks
    You should go out and buy a blaser then.😆


    Sent from my SM-G935F using Tapatalk
    Do what ya want! Ya will anyway.

  13. #13
    Lovin Facebook for hunters kiwijames's Avatar
    Join Date
    Feb 2012
    Location
    Hawkes Bay
    Posts
    7,205
    @stug. FYI I'm running 72g 2225 with AMax. 20 thou jump @3000 fps. Good accurate load in my Rem mag R93. They all seam to work with the same loads in any barrel of same chambering.
    The range of what we think and do is limited by what we fail to notice. And because we fail to notice that we fail to notice, there is little we can do to change; until we notice how failing to notice shapes our thoughts and deeds

  14. #14
    Village Idjit Barefoot's Avatar
    Join Date
    Dec 2011
    Location
    Bunji's Bach
    Posts
    3,993
    Quote Originally Posted by Gibo View Post
    And you wait your turn!! There's heaps of us waiting for non blaser stocks
    Now Stug is a blaser owner you may be waiting even longer.
    R93 likes this.
    The Biggest Room is the Room for Improvement

  15. #15
    MSL
    MSL is offline
    Member MSL's Avatar
    Join Date
    May 2014
    Location
    Waikato
    Posts
    6,476
    Will have to try that load then

 

 

Similar Threads

  1. .260 Loads
    By Normie in forum Reloading and Ballistics
    Replies: 91
    Last Post: 07-12-2016, 09:09 AM
  2. hot loads? 243
    By Neckshot in forum Reloading and Ballistics
    Replies: 11
    Last Post: 27-09-2012, 11:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!