Thread: Blaser R93 loads, 7mm mag and 223

I've done a quick load development for both the 7mm rem mag barrel and 223 barrel.


The 7mm rem mag load is 162 amax seated 50 thou off the lands, 71gr 2217, winchester brass and federal 215 primer, average velocity is 2854. I could shove a bit more powder in, but it is shooting well enough for me.
I cleaned the barrel of all the copper, put an oiled patch through, then a dry patch. Shot 1 and 2 were high, with shot 3 landing where I had it two days ago. I adjusted the scope 2 clicks down and 1 click right, then shot the 3 shot group. Could go 1 click more to the right.


The 223 load is 50gr TTSX seated 50 thou off the lands, 26.5gr H335, Hornady brass, federal 205 primer, avg velocity 3266fps.
I did the same as the rem mag barrel, clean copper, oil, dry patch. Shots 1 and 2 were out a bit, shot 3 was where I had it two days previously. I then fired another 3 shots without adjusting the scope.


Off hunting next weekend.

That will take care of business, is that a carbon stock?

Yep it is. Weighs 550g without the chassis in. Saved about 400g over the off-road stock.

One for the r8 next stug

Need a stock to make a mold from. Also I think the screw for the rear of the chassis comes up through the pistol grip on the R8, cetainly does on the Professional success stock, not sure about the professional stock.

When are you taking orders for the R93 stock?

Originally Posted by kiwijames

When are you taking orders for the R93 stock?

Wait your turn Jimmie.

I'm first😆

Im dropping my rifle off on the weekend and he is not to be distracted by a poo 4 3 advocate😆


Sent from my SM-G935F using Tapatalk

I want the full report. Since you're going to be out tf town I think it's only right @stug sends it to me to trial for you first.

Originally Posted by kiwijames

I want the full report. Since you're going to be out tf town I think it's only right @stug sends it to me to trial for you first.

He says it should be done just as I get back to NZ.

I might send you a pic of it but after you and Brads had fun violating my v3 I won't be letting you touch it😆

It still works ok but has a funky smell.

Sent from my SM-G935F using Tapatalk

Originally Posted by stug

Yep it is. Weighs 550g without the chassis in. Saved about 400g over the off-road stock.

Nice work, you are going to be popular

Originally Posted by R93

Wait your turn Jimmie.

I'm first��

Im dropping my rifle off on the weekend and he is not to be distracted by a poo 4 3 advocate��


Sent from my SM-G935F using Tapatalk

And you wait your turn!! There's heaps of us waiting for non blaser stocks

Originally Posted by Gibo

And you wait your turn!! There's heaps of us waiting for non blaser stocks

You should go out and buy a blaser then.😆


Sent from my SM-G935F using Tapatalk

@stug. FYI I'm running 72g 2225 with AMax. 20 thou jump @3000 fps. Good accurate load in my Rem mag R93. They all seam to work with the same loads in any barrel of same chambering.

Originally Posted by Gibo

And you wait your turn!! There's heaps of us waiting for non blaser stocks

Now Stug is a blaser owner you may be waiting even longer.

Will have to try that load then