Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 15 of 55
Like Tree41Likes

Thread: Bullet pulling related question

  1. #1
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729

    Bullet pulling related question

    Hi ive just brought a rcbs collet puller from Reloading direct (workshop innovation) with associated collets. I pulled 60 odd rounds that were over pressure in my 260 which has gained a personality over time. I have pulled all the bullets and removed 99% of the powder but.................... there are about 50 that have powder stuck in the flash hole. Any suggestions to get it out. I dont have an air compressor. I yes i need to get it out. Name:  IMG_2560.jpg
Views: 365
Size:  26.0 KB

  2. #2
    Member
    Join Date
    Jul 2012
    Location
    Tauranga
    Posts
    2,599
    What about something like a razor brush or fine paint brush with heavy bristles and flick them out. Obviously you dont want to decap them ( which is what I would do )
    Tim Dicko likes this.

  3. #3
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by johnd View Post
    What about something like a razor brush or fine paint brush with heavy bristles and flick them out. Obviously you dont want to decap them ( which is what I would do )
    Cheers i think decapping them may be to hard. may have to subtract powder from new load. cheers.

  4. #4
    Member dogmatix's Avatar
    Join Date
    Dec 2011
    Location
    Northern Gaul (Pukekohe)
    Posts
    6,031
    You can decap them. Just do it gently and carefully.
    Welcome to Sako club.

  5. #5
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by Mauser308 View Post
    So you have one grain of powder jammed in the flash hole of a couple of primed cases?
    yes one or two kernals of powder in 45 odd cases of 260 rem.

  6. #6
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by dogmatix View Post
    You can decap them. Just do it gently and carefully.
    Thats to scary for me. I can see how many kernals there are. ill just take the same ammount of each charge out. im anal.

  7. #7
    Member
    Join Date
    Aug 2019
    Location
    Waikato
    Posts
    214
    Neck tension will be all over the show. Best to resize...
    Tim Dicko and outlander like this.

  8. #8
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    Quote Originally Posted by Tim Dicko View Post
    Thats to scary for me. I can see how many kernals there are. ill just take the same ammount of each charge out. im anal.
    A few kernels of powder will not make the slightest bit of difference in a load of powder for a 260 it is well within the margin of error of your powder weighing
    device, And your neck tension is probably not messed up the brass will spring back after the bullet was pulled, Don't worry your gun is built 50% stronger than
    needed to protect nitwits you can totally destroy a case in the chamber and not hurt yourself I have seen it happen a few times.

  9. #9
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by hamsav View Post
    Yeah ,but ,this sort of "anal" probly means you will eventually retire from reloading with all your fingers and face intact ......apart from maybe mashing a finger or two in the press
    I hope i keep my face and fingers intact. I have definitely had a coordination issue between my left and right hand and my brain once. Mashed my fingers in the press and it was average to say the least.

  10. #10
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by JaSa View Post
    Neck tension will be all over the show. Best to resize...
    Bugger. If i had a expander mandel that could work. i could run a button through safely on a die with out decapper?

  11. #11
    Member
    Join Date
    Aug 2016
    Location
    Manuwatu
    Posts
    729
    Quote Originally Posted by shooternz View Post
    A few kernels of powder will not make the slightest bit of difference in a load of powder for a 260 it is well within the margin of error of your powder weighing
    device, And your neck tension is probably not messed up the brass will spring back after the bullet was pulled, Don't worry your gun is built 50% stronger than
    needed to protect nitwits you can totally destroy a case in the chamber and not hurt yourself I have seen it happen a few times.
    Thanks for the reassurance. Im not worried about pressure or anything as im working up a new load. Ill just reload them and get an idea if the rifle likes the new projectiles. Ill get the powder as perfect as possible. so that i can sleep at night. cheers.

  12. #12
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,526
    @Tim Dicko

    A small, stiff paint brush chucked up in a power drill. You CAN of course also just clean the holes by hand using a watchmakers screwdriver of right size. Unless you use a hammer, this will NOT set off the primer compound as this is shielded behind the brass anvil.

    Brush/drill trick is also good for cleaning out primer pockets.
    Tim Dicko and outlander like this.
    An itch ... is ... a desire to scratch

  13. #13
    Member
    Join Date
    Jun 2014
    Location
    CNI
    Posts
    5,905
    Tap the pulled brass smartly on its side on the bench. This usually dislodges any stuck kernels.
    erniec, Cordite and outlander like this.
    Summer grass
    Of stalwart warriors splendid dreams
    the aftermath.

    Matsuo Basho.

  14. #14
    Member
    Join Date
    Mar 2014
    Location
    Auckland
    Posts
    618
    Am I being too simple when I suggest that you chamber the cases and fire them.......The primer going off will dislodge/burn the powder.......then deprime and resize.
    Micky Duck, Cordite and grandpamac like this.

  15. #15
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,052
    Greetings All,
    Assuming that the last few pesky kernels of powder actually need to be removed may I suggest a simple and safe method. Chamber the empty cases and pull the trigger. Job done. No fingers or eyes will be harmed. If you are doing this at home put the muzzle in a cardboard box to keep the din down but preferably do it at the range. The dead cap can be removed with a punch and base set, neck sizing or full length sizing. Remember to clean the barrel as it will be dirty.
    Regards Grandpamac.

 

 

Similar Threads

  1. .338 bullet pulling die
    By ARdave in forum Reloading and Ballistics
    Replies: 8
    Last Post: 23-03-2018, 07:53 PM
  2. Pulling and tension
    By WillB in forum Reloading and Ballistics
    Replies: 12
    Last Post: 28-11-2017, 06:29 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!