Thread: Bullet seating depth and OAL issues

Sorry if its a bit messy, Barnes recommends .050" jump to the lands for TSX bullets.

If I do that overall length will be 2.310"

the load data for my powder says OAL should be 2.180" (this could be a minimum OAL for pressure reasons maybe?)

the instructions that came with my die set says 2.260" is maximum OAL for .223 (this might just be for magazine feeding possibly?)

So I guess what I'm asking is:
is an overall length of 2.310" in a bolt action ok?
if not is it ok to have .100" of bullet jump to the lands?

Because I believe those are my options, unless I am way off course.