Costly Mistake.

Gidday.

Mate sent this through to me yesterday after he found out about it.

Attachment 258892

Just another reminder to double check that what you read off a page of your book or phone/iPad is what you enter into your scales. Everyone has brain fart moments and this was one of them.

Won’t go into specifics, as I said I wouldn’t, but is a good learning opportunity for everyone. This was the result of putting 10 grains of ball powder over the normal powder charge.

No serious injuries but save to say no more rifle.

Looks a bit like one of Akaroa1's rimfire conversions.

As long as he still got both eyes and all his digits,it's ok.the soiled undies can be washed. Horrible experience for anyone to go through.

A good reason to select powders with high load fill

Jeebus
Always good to get a reminder that we are holding an explosion next to our head on a regular basis
Good to her your mate is all right, stuff can be replaced

Every time i reload a batch of ammo even if I know the load off by heart ill read it from the source I got it from then I will write the load down on a piece of paper and put it in front of where Im doing the powder measuring helps to keep it fresh in my mind to save this kind of thing happening

Another "safety issue" is to put your reading glasses on to be certain before you write it down.. Many of us are in that category..

Am I the only one who think it isn't very helpful to not include specifics? There is plenty of photos online of bubba's pissing hot hand loads and the resulting aftermath

Quote:

---

Originally Posted by Russian 22.

Am I the only one who think it isn't very helpful to not include specifics? There is plenty of photos online of bubba's pissing hot hand loads and the resulting aftermath

---

What more do you need?? A whole ten grains of ball powder too much did the damage. So load must be a big case to have that much spare room. As gimp said,it's a good reason to pick a load that fills case as much as possible. I will load powder into batch of cases then eyeball the powder levels inside.too easy to see if something is wrong.

I bet he has developed a flinch

Quote:

---

Originally Posted by 7mm Rem Mag

I bet he has developed a flinch

---

Get him back onto the .22LR until he gets his confidence back.

Quote:

---

Originally Posted by Russian 22.

Am I the only one who think it isn't very helpful to not include specifics? There is plenty of photos online of bubba's pissing hot hand loads and the resulting aftermath

---

Reading a number from a digital device instead of a normal paper copy was different to his normal process. 74 grains instead of 64 grains.
As I said, complete brain fart

Quote:

---

Originally Posted by 7mm Rem Mag

I bet he has developed a flinch

---

Yeah well it sure as shit doesn't help if already had one either...

Out of interest, what was the chambering? Asking as I'm not really familiar with loading the ball powders (not interested in buying a stockpile and there are concerns with availability). To me, an extra 10grains is a huge amount and for most cases would be a compressed loading if not a crush load!

Gimp's comment nails it I think too.

7PRC possibly. Needed a belt and it would have been golden :).

Quote:

---

Originally Posted by Dicko

7PRC possibly. Needed a belt and it would have been golden :).

---

Nailed it, if you zoom in on the pic you can see 7 on one side of the case head and prc on the other, not to mention the barrel has 284 stamped into it :thumbsup:

I nedd a cheap 7mm barrel. How's it look....
Post come pic of the action. Be interesting to see the outcome

I'm not sure the barrel pictured is part of the rifle in question - who fits and chambers a rifle with the ends still on the blank . ... . It's a no-no

There's no tenon machined on that one either.

Good idea to write the powder weight down and have it in view when weighing it out. Another good check option is to weigh the loaded rounds. A significant overload should show up in the overall weight.