Thread: A couple of new toys comp seating die and Comparator for Measuring sholder bump etc

With all the advice given ^^^^, I might just go back and check a few CBTO measurements.
As an aside, I usually neck size with a Lee collet die, 308W, and rotate the case to at least 3 positions, before going on.
Also do the same when seating the bullet (Hornady Micrometer seater - not VLD though), and find that the CBTO measurement stabilized to within 0.001" - more than sufficient for my feeble attempts at LR range efforts.
Haven't checked case/bullet runout on a jig, but no visible movement by eye, when rolling along a bench.